Dimm Slot Locations; System Maintenance Switch - HP ProLiant DL160 Gen9 User Manual
Hide thumbs
Also See for ProLiant DL160 Gen9:
- Maintenance and service manual (97 pages) ,
- User manual (139 pages) ,
- Maintenance and service manual (116 pages)
Table of Contents
Item
27
28
29
30
31
32
33
* For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe riser
board slot definitions (on page 11)."
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the
letter assignments for population guidelines.
System maintenance switch
Position
S1
S2
S3
S4
S5
S6
Description
10-pin RPS connector
System battery
NMI header
TPM connector
Secondary PCIe riser board connectors*
System maintenance switch
FlexibleLOM sideband signal connector
Default
Function
Off
Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
Off
Off = System configuration can be
changed.
On = System configuration is locked.
Off
Reserved
Off
Reserved
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off
Off = No function
On = ROM reads system configuration
as invalid.
Component identification 13
- Quick Links:
- Hp Ilo
Hide quick links:
Table of Contents
