Installing The Internal Dual Sd Module - Dell PowerEdge R530 Owner's Manual
Hide thumbs
Also See for PowerEdge R530:
- Getting started (2 pages) ,
- Owner's manual (182 pages) ,
- Getting started (2 pages)
Table of Contents
Convention
E
Next steps
1.
If applicable, install the PCIe expansion-card riser.
2.
If applicable, connect the required power or data cables to the expansion card(s).
3.
Reinstall the cooling shroud.
4.
If applicable open the expansion-card latch on the cooling shroud to secure the full length
expansion card.
5.
Follow the procedure listed in
Related Links
Removing the cooling shroud
Removing the (optional) expansion-card riser
Installing the (optional) expansion-card riser
Installing the cooling shroud
Installing the internal dual SD module
Prerequisites
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove the cooling shroud.
NOTE: If applicable, close the expansion-card latch on the cooling shroud to release the full
length card.
4.
If applicable, disconnect the power or data cables from expansion card (s).
5.
If applicable, remove the expansion-card riser
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Locate the IDSDM connector on the system board.
2.
Align the connectors on the system board and the dual SD module.
3.
Push the dual SD module until it is firmly seated on the system board.
Next steps
1.
Install the SD media card(s).
2.
If applicable, install the PCIe expansion-card riser.
3.
If applicable, connect the required power or data cables to the expansion card(s).
4.
Reinstall the cooling shroud.
5.
If applicable open the expansion-card latch on the cooling shroud to secure the full length
expansion card.
6.
Follow the procedure listed in
Related Links
IDSDM indicator code
Not lit
After working inside your
Safety
instructions.
Before working inside your
After working inside your
Condition
Indicates that the card is missing or is booting
system.
system.
system.
89
Table of Contents
Troubleshooting
