Table of Contents
High Density Video Cassette Recorder | Instruction Manual | Setting the On-Screen Display
5. Press the SELECT button to move next item (day,
start time, end time recording hour) and repeat the
process by using the +, – and SELECT buttons.
Note:
•
If you are finished programming and you want to
set the VCR to record the programs you have
entered.
MAKE SURE YOU HAVE INSERTED A TAPE
INTO THE VCR.
THE TIMER BUTTON MUST BE SWITCHED
TO ON (Timer sysmbol will appear on the display)
BEFORE THE VCR WILL RECORD ANY
TIMER PROGRAMS.
The VCR is now set to record the preset programs.
6.4 REVIEW MODE Menu
The REVIEW MODE enables you to display on the
monitor screen the alarm events, power failures, and to
set the buzzer options. You can also clear any alarms
or power failure events.
1. Press the MENU button and the main menu will
appear.
2. Press the MOVE button to select the REVIEW
MODE option and then press the SELECT button
to enter the menu.
The REVIEW MODE menu will appear.
REVIEW MODE
[REVIEW MODE]
ALARM REVIEW
POWER FAIL REVIEW
BUZZER SELECT
↓
[
][→]
ALARM REVIEW
Allows you to view alarm events and then clear the
alarm.
Bosch Security Systems | 26 Feb 2003 | Draft
[MENU]END
3. Press the MOVE button to choose the ALARM
REVIEW option and then press the SELECT
button.
ALARM REVIEW menu will appear.
ALARM REVIEW
[ALARM REVIEW]
1 - - / - - / - -
2 - - / - - / - -
3 - - / - - / - -
4 - - / - - / - -
5 - - / - - / - -
6 - - / - - / - -
7 - - / - - / - -
8 - - / - - / - -
[CLEAR] CLEAR
The list will show alarm events. Up to 8 alarm events
can be displayed on the MONITOR.
4. To erase the alarm record information press the
CLEAR button. On the display panel, the
"ALARM" indication will also be cancelled.
Power Fail Review
You can review or clear the POWER FAIL REVIEW
while your are recording.
7. Press the MOVE button to select the POWER
FAIL REVIEW option and then press the SELECT
button.
The POWER FAIL REVIEW menu will appear.
POWER FAIL
REVIEW MENU
[POWER FAIL REVIEW]
1 OFF 01/01/02 13:21:10
ON 01/01/02 13:21:20
2 OFF - -/- -/- -
ON - -/- -/- -
3 OFF - -/- -/- -
ON - -/- -/- -
4 OFF - -/- -/- -
ON - -/- -/- -
[CLEAR] CLEAR
•
Up to 4 Power fail information lines can be viewed.
8. To erase the power fail review press the CLEAR
button. The power fail review is erased. On the
display panel the "P.F." indication will also be
cancelled.
EN | 19
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
[MENU]END
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
- - : - - : - -
[MENU]END
Table of Contents
