Quick Links
HTR1 Kit Quick Start Guide
1
Installing the HTR1
Note
Make sure you have everything you need before you
begin the installation.
1.
Choose a location and mounting option that provides convenient
access for installing and removing the VCR tape. Ensure that the
location you choose conforms with local regulatory guidelines.
Possible mounting options:
•
Horizontal (upright or
inverted)
Note
Do not mount the VCR enclosure on the floor if bus is
washed out with a hose.
2.
Mount the VCR enclosure base to mounting surface.
Unlock access panel in
front of VCR cover.
Remove cover.
Use VCR
enclosure base to
mark and drill holes.
Secure base with four
#10 x 3/4 in. sheet
metal mounting screws.
Note
Illustration shows an inverted mount.
Console
Beside
driver seat
Under side of
passenger seat
VCR
3.
VCR wiring harness
20 ft. (6.1 m) cables
DB25 connector
Underneath
bulkhead
VCR rear panel
Glove box
(inside or
underneath)
Camera 2 (Stop Arm)
Optional external
microphone (call to
order)
4.
Secure the VCR in the VCR
enclosure base with the
velcro retaining strap.
Slide enclosure cover
inside side rails of enclosure
base.
Replace access panel and
lock it to secure the cover to
the base.
Note
Connect the wiring harness to the electrical system.
Power harness
Signal harness
Complete installation.
Illustration shows an upright mount.
To program VCR, see over.
Red wire
Battery (POS - 3A fuse)
Black wire
Battery (NEG)
White wire
Ignition
Brown wire
Input signal 1 BRK
Black wire
Input signal 2 STP
Green wire
Input signal 3 TRN
Red wire
Input signal 4 FSH
Blue wire
Input signal 5 ARM
Camera 2 (Stop Arm)
Video in
Power
Camera 1
Audio in
Video in
Power
Related Manuals for Honeywell HTR1
Summary of Contents for Honeywell HTR1
- Page 1 HTR1 Kit Quick Start Guide Connect the wiring harness to the electrical system. VCR wiring harness Power harness Red wire Battery (POS - 3A fuse) 20 ft. (6.1 m) cables Black wire Battery (NEG) White wire Ignition Brown wire Input signal 1 BRK...
-
Page 2: Programming The Vcr
© 2007 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to...