Table of Contents
Iiiii
ADJUSTING THE CLOCK
Using the remote control
6.
Press the ADJUST button. The clock starts.
Example: To set "6:30
("AM 6:30"),
1:
—1
l—l
1.
Press the CLOCK button. The clock display appears.
l_l
Z
l_l
After connecting the mains lead for the first time, when you press
The time can be set accurately by pressing the ADJUST button
the CLOCK button, the clock display blinks.
when a time signal is heard.
2.
Press the ADJUST button within 10 seconds.
\l/
l—l l—l l—l
For AU: The clock is 12-hour
l_l
l_l l_l
display. Example: AM 12:00
The hours display blinks.
3.
Press the + or – TIME SET button to set the "hours."
\l/
1:
l—l l—l
l_l
l_l
l_l
4.
Press the ADJUST button,
_\l/
——
/:1 ~l_l l_l
These operations can be done, even if in standby.
To display the clock during operation, press the CLOCK button. Press
it again to return to the original display.
When the display blinks because of a power failure, reset the time.
For UK: Changing the clock to the 12-hour display
1.
Press the STANDBY/ON
button to turn the power off.
2.
While pressing the MEMORY button on the front panel, press the
button (CD section) on the front panel.
Example: 13:00 —
PM 1:00
To return the original setting, repeat steps above.
The minutes display blinks.
5.
Press the + or – TIME SET button to set the "minutes."
,=
:) ',~,
l_l
_l l_l
BEFORE OPERATION
Turning the power on and off
Press the STANDBY/ON
button. The indicators and displays light and the
STANDBY indicator goes out. (After connecting the mains lead, when you
press the STANDBY/ON
button for the first time, the volume reset feature
automatically
sets the initial volume level. )
To turn off the power, press the STANDBY/ON button again. The STANDBY
indicator lights. The clock display remains lit.
When the mains lead is connected to the AC outlet, the STANDBY
indicator lights and the unit will respond to commands from the remote
control.
Smart start function
If the following buttons are pressed when the unit is in standby, the unit
turns on automatically
and the selected function is set.
CD player section
/11,DISC 1, DISC2, DISC3, OPEN/CLOSE
Tuner section
TUNER/BAND
Remote control
/11,
TUNER/BAND,
TAPE, VIDEO
Selecting the function
Press the FUNCTION button to select the desired function. Each time the
button is pressed, the display changes as follows:
CD —
TAPE—TUNE—
VIDEO—
CD—
The function is automatically
selected when CD play is started or when the
TUNER/BAND
button has been pressed (except during recording or tape
dubbing).
When the function selection
is changed,
CD play is automatically
stopped.
Adjusting the volume
Press the
A
or
v
VOLUME button, or press the + or – VOLUME button on
the remote control. The volume level appears on the display (VOL 0- VOL
lo).
To reduce the volume temporarily
(muting)
Press the MUTE button on the remote control. "MUTE" blinks on the
display.
To restore the previous volume setting, press the MUTE button again.
"MUTE
disappears,
What is SRS(O>?
SRS (01,
the Sound
Rettieval
System,
rePlaces stereo as the
method of accurately reproducing
sound and is rapidly becoming the
standard for 3-D audio technology.
It creates a three-dimensional
sound image from any audio source with only two conventional
stereo
speakers. Whether the signal is stereo or surround sound encoded,
SRS (.>
expands the mateflal and immerses the listener in three-
dimensional
sound.
SRS (.>
differs
from stereo
and traditional
sound
exPansion
techniques
because
it is based on the human hearing system. It
retrieves the spatial information
from recordings
and restores the
original three-dimensional
sound field. As a result, the reproduced
sound is much closer to a live performance.
Like live performances,
SRS (.1
has no critical listening position (sweet sPot). Listeners can
move around the room and continue to be immersed
in full three-
dimensional
sound.
Qgg
QQQ
/
',
'
'\
',. . . ...-.'
'.,
/'
,'
J@
~@
""
O
.:
c ~
,'
l"
O ' !,;;: Q,
;"
[J
s'>:
,~
&/&'\&!
""
"'...@__ fi----f
i...
STEREO SOUND
SRS SOUND
SRS,
the SRS symbol "C@]"
and "Sound Retrieval
System" are
registered
trademarks
of SRS Labs, Inc. in the U.S. and selected
countries.
SRS
(Sound Retrieval System) technology
is manufactured
under
license from SRS Labs, inc.
SRS
(Sound
Retrieval
System)
technology
is protected
by USA
patents 4,748,669 and 4,841,572 and additional patents worldwide.
To activate the SRS(Sound
Retrieval System)
Press the SRS SOUND button. The SRS SOUND indicator lights.
The
SRS
will not activate with monaural sources.
7
Table of Contents
