Table of Contents
Bosch DCN Standalone Automatic Camera
Control
9
Warning and error reports
This section summarizes the warnings and errors and provides the text actually shown.
Warning
Icon
Main instruction
Content
Command links
Button
Warning
Icon
Main instruction
Command links
Button
Warning
Icon
Main instruction
Content
Buttons
Error
Icon
Main instruction
Content
Button
Footer icon
Footer
Error
Icon
Main instruction
Content
Button
Bosch Security Systems B.V.
Warning when the application exits while configuration process is
active.
Do you want to save the configuration before application exit?
The configuration process is still active.
Save and exit
Exit without saving
Cancel
Warning when the application exits that the configuration is changed
but not yet saved.
Do you want to save the configuration before application exit?
Save and exit
Exit without saving
Cancel
Warning when the file opened can not be read (corrupt, empty, read
fail).
The file {0} can not be opened or is corrupt.
The file can not be opened. Do you want to open a new file?
Open a new file
Don't open a new file
Error issued when the connection with the DCN system can not be
established.
Check your connection with the DCN system.
Can not establish the connection with the DCN system. Check the
protocol and baudrate settings on the DCN system. Connection to
the DCN system might be occupied by the DCN-SW server or the
Download and License Tool.
OK
Information
system.
Error issued when the DCN system has incompatible Software
version installed.
Check the version of your DCN system.
The DCN system with version {0} does not match the version of the
DCN-SWSACC application. Update your DCN system to at least
version 2.60.xxxx by using the Download and License Tool.
OK
Software Manual
Warning and error reports | en
DCN-SWSACC_V4.0 | V1.0 | 2011.10
21
Table of Contents
