Black & Decker LST136 Instruction Manual

40V MAX* LiTHiUM TRIMMER/EDGER

iNSTRUCTiON MANUAL

IVlodel Number

LST136

PLEASE

READ BEFORE

RETURNING

THIS PRODUCT

FOR ANY REASON:

If you have a question or experience a problem with your

Black & Decker purchase, go to

WWW.BLACKANDDECKER.COM/INSTANTANSWERS

for instant answers 24 hours a day.

If you can't find the answer or do not have access to the internet,

call 1-800-544-6986

from 8 a.m. to 5 p.m. EST Mort. - Fri

to speak with an agent.

Please have the catalog number available when you call.

SAVE THiS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPANOL EN LA CONTRAPORTADA.

POUR LE FRAN(_AIS, VOIR LA COUVERTURE

ARRIERE.

DE OPE.RACION, CENTROS DE SERVICIO

INSTRUCTIVO

Y POLIZA DE GARANTIA. ADVERTENClA:

LEASE ESTE

INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

*Maximum initial battery pack voltage (measured without a

workload) is 40 volts. The nominal voltage is 36.

IVlodel # LST136

KEY iNFORMATiON

YOU SHOULD

KNOW:

• The guard

must be installed

before trimming

or edging = if

not, the motor will overheat

(page 8).

• When replacing

the line, use only .065 inch diameter

ROUND

line (B&D Model #AF-100

is recommended)

-

otherwise

the tool will not function

properly

(page 11).

• Do not bump the feed head against

the ground

- it will

disrupt the feed mechanism.

• For use only with LB series 36v or 40v Max* batteries.