Check the supplied items Preparing the remote control • Insert the two supplied AAA batteries into the battery case, following the polarity markings (+ and -). Check that the following accessories are supplied with this product. ■ ■ Remote Control Batteries (AAA, R03, UM-4) (x 2) Operating range of the remote control ■...
Automatically optimizing the speaker menu (on TV) p.29 settings to suit your room (YPAO) * Requires optional Yamaha products such as iPod dock, iPod wireless system, and Bluetooth receiver. Sound field reproductions like actual p.37 movie theaters and concert halls...
● Full of useful functions! Creating stereoscopic sound fields (p.39) At time like this The unit supports the surround playback of up to 7.1 channel. Various sound programs and surround ● The combination of video/audio input jacks prepared on Connecting various devices (p.18, 23) decoders equipped with the unit can supply more this unit does not match an external device...
For connecting camcorders, game consoles, etc (p.26). - The iPod is charging with “Standby Charge” (p.62). Attach the supplied VIDEO AUX input cover (p.4) when not - The Yamaha iPod wireless system is connected (p.48). PHONES jack using this jack to protect against dust.
Front display (indicator) VOL. ENHANCER ADAPTIVE DRC SLEEP STEREO MUTE TUNED SBL SB SBR HDMI Cursor indicators Lights up when an HDMI device is connected to the unit or Lights up the available cursors on the remote control for each an HDMI signal is being output.
DOCK jack Power cable SUBWOOFER jack For connecting an optional Yamaha iPod universal dock, For connecting the unit to an AC wall outlet (p.28). For connecting a subwoofer with a built-in amplifier (p.16). Wireless System for iPod and Bluetooth wireless audio...
V-AUX AUDIO Audio jack TV control keys DOCK A Yamaha iPod universal dock, iPod Controls TV operation, such as input and volume level wireless receiver, and Bluetooth wireless receiver that are connected to (p.78, 79). AUDIO DOCK the DOCK jack.
SETUP General setup procedure Perform the following 8 steps before use. Select the speaker layout depending on the number of speakers, and then place the speakers in Speaker layout (p.12) the room. Connecting speakers (p.15) Connect each speaker to the unit. Connecting a TV (p.18) Connect TV to the unit.
2 3 4 5 6 7 8 Speaker layout Speaker layout Select the speaker layout depending on the numbers of speakers, and then place the speakers and subwoofer (with a built-in amplifier) in the room. The following section describes the representative speaker configuration of 2.1 to 7.1 channel system. NOTES •...
3 4 5 6 7 8 Connecting speakers Connecting speakers Connect speakers to the unit. Here are connections of 7.1-channel speaker layout 6.1-channel speaker layout 7.1- and 6.1-channel speaker layout as examples. If you select another channel speaker layout, connect The unit (rear) The unit (rear) speakers while referring to the connection of 6.1-...
3 4 5 6 7 8 Connecting speakers ■ Connecting speaker cables Connecting front speakers NOTES compatible with bi-amp Each speaker has two speaker cables. One is for • Before making the bi-amplification connections, remove any connecting the - (negative) terminal of the unit and the connection brackets or cables that connect a woofer with a tweeter.
Cable plugs and jacks The unit is equipped with the following input/output jacks. Use jacks and cables appropriate for devices. Audio/video jacks Analog video jacks Audio jacks HDMI jacks COMPONENT VIDEO jacks OPTICAL jacks Digital videos and sounds are transmitted. Use an HDMI The signal is separated into three devices: These jacks transmit optical digital audio signals.
1 2 3 4 5 6 7 8 Connecting a TV Connecting a TV ■ Connect a TV to the unit. The video signals input to the unit are output to the TV. Connection method 1 (ARC-compatible TV) TV audio can also be output from the unit. The recommended way to connect a TV Connect a TV to the unit with an HDMI cable.
Page 19
1 2 3 4 5 6 7 8 Connecting a TV Configure the settings for ARC. Configure the settings for HDMI Control. a Confirm that the ARC function for the TV is set to on. a Activate the HDMI control function of the TV and the devices that support the HDMI control function.
Page 20
1 2 3 4 5 6 7 8 Connecting a TV ■ c Press SETUP. Connection method 2 (HDMI Control -compatible TV) OPTION OPTION Connect a TV to the unit with an HDMI cable and an optical cable. SETUP SETUP Cursor keys ENTER VOLUME...
Page 21
1 2 3 4 5 6 7 8 Connecting a TV ■ k Turn on the playback devices, and then confirm the following: Connection method 3 (TV with HDMI input jacks) Unit: Whether the input signals from the playback devices are selected as the HDMI Connect a TV to the unit with an HDMI cable and an optical cable.
Page 22
1 2 3 4 5 6 7 8 Connecting a TV ■ Connection method 4 (TV without HDMI input jacks) COMPONENT VIDEO connection (with a component cable) Video input Connect a TV by any of the following connections depending on the input jack for TV MONITOR OUT (Component video) (COMPONENT VIDEO) jack...
1 2 3 4 5 6 7 8 Connecting playback devices Connecting playback devices ■ The unit is equipped with various types of input jacks such as an HDMI jack. Connect Component video connection them to the appropriate output jacks on the playback devices. Connect a video device to the unit with a component cable and an audio cable (an For connecting an iPod, Bluetooth devices and USB storage devices, refer to the optical cable or a coaxial cable).
Page 24
1 2 3 4 5 6 7 8 Connecting playback devices ■ ■ S-video connection Analog video connection (U.K. and Europe models only) Connect video devices to the unit with a video pin cable and an audio cable (any of a coaxial cable, an optical cable and stereo pin cable.) Input jacks of the unit (AV3-6) are Connect a video device to the unit with a S-video cable and an audio cable (an analog different depending on the audio input jacks of the video devices.
Page 25
1 2 3 4 5 6 7 8 Connecting playback devices ■ Change the combination of input jacks (video/audio) Complete the connections for external devices (such as a TV and When an input jack of the unit does not match an output jack of a video device, select playback device), the power cable and so on, and then turn on the another jack of the unit to match the jack of the video device.
1 2 3 4 5 6 7 8 Connecting playback devices Connecting audio devices (such as a CD player) Connecting to the jack on the front panel Connect audio devices (such as a CD player, MD player and so on) to the unit. Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a Select a correct connection depending on the output jacks of the audio devices video camera and a game console.
1 2 3 4 5 Connecting the FM/AM antennas Connecting recording devices Connecting the FM/AM antennas Connecting recording devices Connect supplied indoor FM antenna and an AM antenna. Use AV OUT jacks to connect video and audio recording devices. Selected incoming analog audio/video signals are output through AV OUT jacks.
1 2 3 4 5 6 7 Connecting the power cable Connecting the power cable Before connecting the power cable (General model only) Set the switch position of the VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. VOLTAGE SELECTOR SURROUND BACK/...
Connect the YPAO V-AUX V- V V AUX listening position, and adjusts the volume balance and the tone microphone to the YPAO MIC jack on the front panel. settings automatically (YPAO: Yamaha Parametric room Acoustic The unit (front) AUDIO AUDIO DOCK DOCK Optimizer).
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Starting the measurement Confirm that “Save / Exit” is selected and then press CODE SET CODE SET ENTER. SOURCE SOURCE RECEIVER RECEIVER Start the measurement by following these steps. HDMI HDMI •...
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Confirming the measurement result Press the cursor keys ( / ) to select an item. CODE SET CODE SET The red-box indicates the speaker that has a problem in the SOURCE SOURCE RECEIVER...
E-8:No Signal (E-8:NO SIGNAL) cannot detect test tones. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. E-9:User Cancel The measurement has Select “PROCEED (Proceed)” in step 2 of “Procedure to exit YPAO” to resume the measurement. Select “RETRY (Retry)” to restart the measurement from (E-9:CANCEL) been canceled.
1 2 3 4 5 6 7 8 Optimizing the speaker settings automatically (YPAO) Warning messages Even if any warning message is displayed after the measurement, you can save the measurement results. However, we recommend that you perform YPAO again for the optimal speaker settings.
PLAYBACK CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI Basic playback procedure V-AUX Input selection keys Switching the information displayed on Turn on external devices (TV, BD/DVD player, etc.) connected to the unit. the front display AUDIO DOCK TUNER Use the Input selection keys to select the input source.
Changing input settings with a single key (SCENE function) CODE SET CODE SET SOURCE RECEIVER SOURCE/ RECEIVER HDMI HDMI With the SCENE function, an input source and registered settings Changing the settings for the SCENE (the sound program/surround decoder, Compressed Music function V-AUX V- V V AUX...
Enjoying the desired sound field effect CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI The unit is equipped with a variety of sound programs and sound decoders. Sound programs can make sounds richer, be played on V-AUX V- V V AUX the stereo and more.
The reproduced depth is also restrained relatively to ensure the This unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP separation between audio channels and the clarity of the sound.
Page 38
■ Sound programs/stereo reproduction suitable for audio contents (MUSIC) Include suitable sound programs for listening to music sources such as CDs. ❏ CLASSICAL This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the interior finish as a normal standard for Hall in Munich European concert halls.
■ Enjoying more spatial sound fields Enjoying multi-channel sounds (surround CODE SET CODE SET (CINEMA DSP 3D) decoder) SOURCE SOURCE RECEIVER RECEIVER The CINEMA DSP 3D creates virtual speakers by using front HDMI HDMI When using a surround decoder, audio sources can be played speakers, center speakers and surround speakers, which brings back with up to 7.1-channel.
Playback without sound field effects Playing back the compressed audio CODE SET CODE SET (straight decoding mode) dynamically (Compressed Music SOURCE SOURCE RECEIVER RECEIVER Enhancer) HDMI HDMI By using the straight decoding mode, sounds from each channel included in input sources are output from each speaker without V-AUX V- V V AUX sound field processing.
Listening to FM/AM CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI When tuning a radio, select a frequency or a registered station. Press STRAIGHT repeatedly to select one of the frequency steps. V-AUX V- V V AUX TUNER Switch this unit to the standby mode, and then •...
■ Receiving an FM broadcast that has a poor Press ENTER. CODE SET CODE SET signal READY VOL. SOURCE SOURCE RECEIVER RECEIVER It may be possible to receive an unstable FM broadcast by 01:FM 87.50MHz HDMI HDMI switching from stereo receiving to monaural receiving. V-AUX V- V V AUX (If necessary) To change the preset number from...
Page 43
■ Registering stations manually Press PRESET to select the preset number. CODE SET CODE SET After pressing PRESET once, numeric keys can be used for Select stations manually and register them to the preset numbers. SOURCE SOURCE RECEIVER RECEIVER inputting the preset number (01 to 40) directly. HDMI HDMI Tune the station that you want to register, referring...
Radio Data System tuning Front display (when “Program Type” selected) CODE SET CODE SET Frequency SOURCE SOURCE RECEIVER RECEIVER (U.K. and Europe models only) 9850 VOL. HDMI HDMI Radio Data System is a data transmission system used by FM CLASSICS V-AUX V- V V AUX stations in many countries.
Press ENTER to start the search function. Press OPTION. CODE SET CODE SET Status OPTION VOL. SOURCE SOURCE RECEIVER RECEIVER READY Tone Control HDMI HDMI VOL. VOL. ENHANCER iPod CHARGE SLEEP STEREO TUNED TP FM 87.50MHz V-AUX V- V V AUX Press the cursor keys ( / ) to select “Video Out.”...
Playing back songs with iPod By using the USB cable supplied with iPod, optional Yamaha iPod universal dock (such Connecting an iPod as YDS-12) or optional Yamaha iPod wireless system (YID-W10), play back songs from connected iPod with the unit.
Page 47
■ Using the iPod dock to connect an iPod Press DOCK to select “DOCK” as the input source. Connect the iPod to the unit with the optional Yamaha iPod universal dock. Select the content of the iPod, and then start playback.
Page 48
(transmitter). an iPod SOURCE SOURCE RECEIVER RECEIVER Wait for a while until the following display appears on the front Connect the iPod to the unit with the optional Yamaha iPod wireless HDMI HDMI display. system. V-AUX V- V V AUX VOL.
Controlling while watching a TV monitor Press the cursor keys to select the content, and then CODE SET CODE SET press ENTER to confirm the selection. SOURCE SOURCE RECEIVER RECEIVER When connecting iPod with a USB cable or iPod dock, iPod can be After selecting a song, playback starts and the Now Playing HDMI HDMI...
Page 50
■ ■ Browse view Now Playing view CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI V-AUX V- V V AUX AUDIO AUDIO DOCK DOCK TUNER TUNER PRESET PRESET TUNING TUNING INFO INFO MEMORY MEMORY SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT MOVIE...
Page 51
■ Controlling with the remote control Press the cursor keys ( / ) to adjust the setting. CODE SET CODE SET DOCK Without using “operation menu icon” on the Now Playing view, iPod SOURCE SOURCE RECEIVER RECEIVER VOL. can be operated directly with the remote control. Repeat;;;;;One HDMI HDMI...
Controlling by iPod itself CODE SET CODE SET RECEIVER RECEIVER SOURCE SOURCE Control iPod to play contents. HDMI HDMI Press MODE. V-AUX V- V V AUX The display on the TV monitor disappears, and then operations can be controlled by the iPod. AUDIO AUDIO DOCK...
TUNING TUNING MEMORY INFO INFO MEMORY • The Yamaha Bluetooth wireless audio receiver (YBA-10) can be paired with up to • When connecting your Bluetooth device to a Bluetooth wireless audio receiver for SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT eight Bluetooth devices. When the ninth device is paired, the pairing setting for the...
Select the Bluetooth wireless audio receiver from Press the cursor keys ( / ) repeatedly to select CODE SET CODE SET the Bluetooth device list, and then enter a pass key “Connect,” and then press ENTER. SOURCE SOURCE RECEIVER RECEIVER “0000.”...
Playing back songs with USB storage devices CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI When a USB device is connected to the unit, audio files in the Controlling while watching a TV monitor device, such as WAV (PCM format only), MP3, WMA and MPEG-4 V-AUX V- V V AUX While watching a TV monitor, selecting songs and playback are...
Page 56
■ ■ Browse view Now Playing view CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI V-AUX V- V V AUX AUDIO AUDIO DOCK DOCK TUNER TUNER PRESET PRESET TUNING TUNING INFO INFO MEMORY MEMORY SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT MOVIE...
Page 57
■ Controlling with the remote control Press ENTER. CODE SET CODE SET Without using the “operation menu icon” on the Now Playing view, VOL. SOURCE SOURCE RECEIVER RECEIVER USB devices can be operated directly with the remote control. Repeat;;;;;Off HDMI HDMI Enables remote V-AUX...
Combining a song from a USB storage Selectable video inputs CODE SET CODE SET device (iPod) with video from an external SOURCE SOURCE RECEIVER RECEIVER A video signal input from HDMI1-5 is output. HDMI1-5 device HDMI HDMI AV1-6 A video signal input from AV1-6 is output. V-AUX V- V V AUX While listening to a song from a USB device, favorite videos can be...
Configuring settings specific to an individual input source (Option menu) CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER Available settings in Option menu Depending on the input source, configure settings for the function HDMI HDMI related to playback. An operation for settings is possible with only V-AUX V- V V AUX the front display without using a TV monitor.
Page 60
■ ■ Tone Control Enhancer Adjusts the balance of the high-frequency range (Treble) and low-frequency range Enables/disables Compressed Music Enhancer (p.40). (Bass) of sounds output from the front speakers. When headphones are connected, Input sources adjusts the balance of the high-frequency range and low-frequency range of sounds All (the setting is applied to each input source) output from headphones.
Page 61
■ ■ Extended Surround (EXTD Surround) Signal Info Selects the 5.1 to 7.1-channel signal playback method when surround back speakers Displays information on the current video and audio signals. are used. Input sources HDMI1-5, AV1-4, V-AUX and the input source set as a TV audio input when ARC is used Input sources HDMI1-5, AV1-4, V-AUX and the input source set as a TV audio input when ARC is used Items...
Page 62
■ ■ Standby Charge iPod Interlock (Interlock) Sets whether or not to charge an iPod connected to the iPod dock or iPod wireless Sets whether operations for the iPod connected to the iPod wireless audio receiver are audio receiver while the unit is in standby mode. in linked with operations for the unit.
CONFIGURATIONS CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI Configuring various functions (Setup menu) V-AUX V- V V AUX The settings of the unit can be changed from the “Setup” menu Press the cursor keys ( / ) to select an item (p.64) and press ENTER.
Setup menu list Menu Item Description Page Front Selects the size of the front speakers. Center Selects the size of the center speaker and whether or not to use the speaker. Surround Selects the size of the surround speakers and whether or not to use the speakers. Configuration Surround Back Selects the size of the surround back speakers and whether or not to use the speakers.
❏ Surround Configuring the speaker settings (Speaker) Selects the size of the surround speakers and whether or not to use the speakers. Adjust parameters for speakers manually. Settings Large Select this when large surround speakers are connected. Select this when small surround speakers are connected. The Small (Default) subwoofer (or front speakers) will produce surround channel low- frequency components.
Page 66
■ ❏ Subwoofer Distance Set whether or not to use a subwoofer. Separately adjusts the timing at which each speaker produce audio so that sounds from Settings the speaker reach the listening position at the same time. Submenu Select this when a subwoofer is connected to the unit. During playback, Use (Default) the subwoofer will produce audio from the LFE (low-frequency effect) Meter...
Page 67
■ Equalizer Use the cursor keys ( ) and select “EXIT,” and then press ENTER to finish “Equalizer.” Selects an equalizer type. “YPAO:Flat,” “YPAO:Front” and “YPAO:Natural” can be set after performing YPAO. ■ Test Tone Settings Turns the test tone generator on or off. When this setting is set to “On,” the volume Through (Default) Disables the equalizer.
■ Configuring the settings of audio output signals Dynamic Range (Sound) Selects the dynamic range adjustment method for audio bit stream (Dolby Digital and DTS) signal playback. Configuring the settings of audio output signals. Settings Maximum (Default) Produces audio without adjusting the dynamic range. Standard Adjusts the dynamic range for optimum volume for regular home use.
Setting sound program and decoder parameters (DSP) Press the cursor keys to adjust the parameters, and then press ENTER. If necessary, repeat step 3 to 4 to set other items. Configuring the settings of sound programs and surround decoders. Press SETUP to finish “Program.” •...
Page 70
❏ Category: MUSIC (except 2ch Stereo and 7ch Stereo) ■ When “ PLIIx Music ( PLII Music)” is selected: Sound programs Item Description Setting Hall in Munich, Hall in Vienna, Chamber, Cellar Club, The Roxy Theatre, The Bottom Line Off (Default), On Item Description Setting...
Configuring the various settings (Function) Press the cursor keys ( ) to select “OK,” and then press ENTER. To change other input names, repeat step 2 to 5. Set the various features that have handy functions. Press SETUP to close “Input Rename.” •...
■ Memory Guard Setting HDMI functions (HDMI) Prohibits setting changes to prevent careless changes being made to the settings of the Set the settings on HDMI functions. “Setup” menu, YPAO, and SCENE. Settings Off (Default) Settings are not protected. Prohibits changes to the settings in the “Setup” menu until it is returned to “Off.”...
❏ TV Audio Input ❏ SCENE Select the input source that receives audio signals from TV while the HDMI Control Specify whether or not a TV or external device (such as a BD/DVD player) connected to function is on. When using a TV that supports the Audio Return Channel function and the unit is operated by interlocking by pressing SCENE.
Page 74
■ ❏ Resolution Standby Through Select the resolution of HDMI output video signals. For details on conversion of video Specify whether or not audio/video signals from HDMI inputs are to continue to be resolution, refer to “Video conversion table” (p.91). transmitted to a TV when the unit is in standby mode.
Setting the language displayed on the TV screen (Language) Selecting the language displayed on the TV screen. Settings English (Default) English Japanese Français French Deutsch German Español Spanish Russian • Only English is displayed on the front display. • Even if selecting a language in this item, the characters contained in the name of file, folder and song cannot be displayed in the selected language.
Press STRAIGHT to select the value. The remote control of the unit can only receive signals from a receiver which has an identical ID (remote control ID). When using multiple Yamaha AV receivers, you can set Press to switch the unit to the standby mode, and then switch it on each remote control with a unique remote control ID for its corresponding receiver.
Setting the bi-amp connections Settings Enables the monitor check function. (Video output signals of a resolution YES (Default) not supported by the TV will not be transmitted.) BI-AMP - Disables the monitor check function. (Video output signals of any SKIP resolution will be transmitted.) Switch the bi-amp connections of the front speakers on or off.
Controlling other devices with the remote control CODE SET CODE SET SOURCE RECEIVER SOURCE/ RECEIVER HDMI HDMI You can operate an external device such as a TV or BD/DVD player Registering remote control codes for TV with the remote control of the unit by setting the remote control code operations V-AUX V- V V AUX...
MUTE TV VOL TV CH • The CD player (Yamaha: 5095) to AV3 as factory default settings. No remote control keys are assigned to other input selection keys. Use “Remote Control Code Search” in the CD-ROM to search the available remote control codes for the category, manufacturer, or external device.
■ Operating external devices Initializing all remote control codes SOURCE CODE SET CODE SET When the remote control codes for external devices are assigned to SOURCE RECEIVER Initializing all remote control codes to the initial factory settings. SOURCE/ an input selection key, the external device can be controlled with HDMI HDMI RECEIVER...
And this may cause injury or damage this another Yamaha product or another remote control may work on this unit. In this case, unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the set each remote control with a unique remote control ID for its corresponding receiver maximum volume level for this unit in advance (p.68).
The capability to turn on the power is disabled as a safety precaution. Contact The power will not turn on. The internal circuits of the unit have a problem. your nearest Yamaha dealer or service center to request repairs. The internal microcomputer is hung-up due to an external electric Press and hold (power) for over 10 seconds.
Audio Problem Cause Remedy No appropriate input source has been selected. Select an appropriate input source with the input selection key. Signals that the unit cannot reproduce are being input from a source No sound. Use an input source that has signals that can be reproduced on the unit. device, such as a CD-ROM.
Problem Cause Remedy (When using HDMI Control function) The setting of “TV Audio Input” to Select the appropriate audio input jack in “TV Audio Input” on the “Setup” match operations carried out on TV is not set. menu. (When using the Audio Return Channel function) The Audio Return Set “ARC”...
Problem Cause Remedy The TV is connected to the unit with a cable except for HDMI cable. Use an HDMI cable to connect the TV to the unit. The menu of the unit is not displayed. Select the input source of the TV to the video input from the HDMI OUT of the An appropriate video input is not selected on the TV.
Not found The Bluetooth device is not found. - Check if the Bluetooth device is turned on. - Check if the Bluetooth device is within 10 m (32 ft.) of the Yamaha Bluetooth Wireless Audio Receiver. - Do pairing again.
Ideal speaker layout The following illustration indicates the ideal speaker layout. We recommend using the following layout as a guide when placing the speakers. However, by using YPAO, you can automatically optimize the speaker settings to suit your speaker layout. Turn it slightly inward to reduce wall reflections.
Based on a wealth of actually Dolby TrueHD is an advanced lossless audio technology developed for high-definition disc-based measured data, Yamaha CINEMA DSP uses Yamaha’s original DSP technology to combine Dolby media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this...
Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio simultaneously. Supported by Yamaha has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP surround HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future, effects even without any surround speakers, by using virtual surround speakers.
Page 90
S-video signal With the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S VIDEO jack eliminates video signal transmission loss and allows recording and playback of even more beautiful images.
■ Video signal flow Video conversion table The video signals input from video devices to the unit are output to a TV. • Use “Processing” in the “Setup” menu to change the resolution and aspect ratio of video signals and output from the HDMI OUT jack. •...
Information on HDMI HDMI Control Turn on the unit, the TV and external devices. Set the HDMI Control function of the unit, the TV and external devices Connecting the unit and TV with an HDMI cable links the TV’s remote control to the unit compatible with HDMI Control (such as a BD/DVD player) to “On.”...
Bluetooth™ Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with • This unit is not compatible with the audio commentary features (for example, the special audio contents a license agreement.