Opening The Door; At The End Of Program; Water In The Drum - Electrolux EWW 14912 User Manual

Hide thumbs Also See for EWW 14912:
Table of Contents
20
www.electrolux.com

5.5 Opening The Door

While a program or the Delay Start
is operating, the appliance door is
locked and the display shows the
indicator '
First set the machine to PAUSE by
pressing the "Start/Pause" touchpad.
Wait until the door lock indicator '
goes off, then the door can be opened.
If the door lock indicator '
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or
the drum is turning. In this case the door
CAN NOT be opened.
If you can not open the door but you
need to open it you have to switch the
machine off by pressing the 'On/Off'
button to deactivate the appliance. After
about 5 minutes the door can be
opened.
CAUTION!
Pay attention to the water
level and water temperature.
5.6 At The End Of The Program
-
The appliance stops automatically.
-
The acoustic signal will operate.
-
The display will show '
-
The indicator of the touchpad
Start/Pause goes off.
-
The door lock indicator '
goes off.
-
Remove the laundry from the
appliance. Make sure that the
drum is empty.
-
Keep the door ajar, to prevent the
mildew and odours.
-
Turn off the water tap.
'.
' does not
'.
'
5.7
When The Washing Program
Is Completed, But There Is

Water In The Drum

-
The drum turns regularly to
prevent the creases in the
laundry.
-
The door lock indicator '
'
on. The door stays locked.
You must drain the water to open
the door.
To drain the water:
1.
Set the "Spin" program.
2.
If necessary, decrease the spin
speed.
3.
Press the touchpad Start/Pause.
The appliance will drain the
water and spin.
4.
When the program is completed
and the door lock indicator '
goes off, you can open the door.
5.
Press the 'On/Off' button to
deactivate the appliance.
5.8
AUTO Stand-by Option
The AUTO Stand-by option
automatically deactivates the
appliance to decrease the energy
consumption when:
You do not press any buttons
for 5 minutes before you press
"Start/Pause".
Press the "On/Off" button to
activate the appliance again.
After 5 minutes from the end of
the washing program.
Press the "On/Off" button to
activate the appliance again.
' is
'
Table of Contents
loading

Table of Contents