Removal Of The Float Switch; Removal Of The Air Filter - Hitachi RCI-1.0FSN3 Service Manual
Indoor units system free series & complementary systems
fsn(h)(2/3/4)(e/m)(i)(-du)
Hide thumbs
Also See for RCI-1.0FSN3:
- Installation & maintenance manual (55 pages) ,
- Operation manual (24 pages) ,
- Installation and operation manual (756 pages)
Table of Contents
10 Servicing
10.6.6 Removal of the float switch
Nº
1
N O T E
To disconnect and remove the float switch, previously see the
chapter corresponding to the wiring diagrams in this Manual.
Remove the drain pump support screws and remove it.
Loosen the screws securing the float switch to the support.
Loosen the resin nut securing the float switch and remove it.
N O T E
The torque value of the resin nut is 0.3 - 0.4 Nm. If the torque
value is higher, the nut will be damaged.
Nº
1
10.6.7 Removal of the air filter
Nº
1
Air filter
2
Screws
3
Air filter fixture bar
352
SMGB0077 rev.0 - 01/2013
Part
Float switch position
Part
Float switch
Part
Hide quick links:
Table of Contents
