List Of Log Messages; Log Messages On The Camera - Canon VB-M700F Operation Manual
Network camera
Hide thumbs
Also See for VB-M700F:
- Operation manual (145 pages) ,
- Specifications (2 pages) ,
- Installation manual (2 pages)
Table of Contents
List of Log Messages
Log Messages on the Camera
Log messages are classified into the following types.
Category
Level
crit
Error
err
Error
warning
Warning
notice
Warning
info
Information
Category
Level
alert
Error
Note
If no content is recorded in a log for approximately two hours, "--
MARK --" will be recorded in the message area.
Application (camera) messages
W001 Starting and stopping of system [info]
Description
%1 webview (W001)
%1
Starting or stopping
Meaning
wvhttp server (webview) has started or
stopped.
W030 Startup and shutdown of WebView Livescope
Client [info]
Description
%1%2 host=, user=, prio=<
Priority>(W030)
%1
W: WebView session, V: Session-less video
client, N: Session-less event client
%2
+: Connect, -: Disconnect
Meaning
The camera server client was connected or
disconnected.
8
-8
Code
Fault level
4xx
Software-level failure
(Task operations will
stop)
3xx
Operational error
(Operations will
continue)
2xx
Non-operational error
1xx
Error external to the
system
0xx
Information on normal
operation
Code
Fault level
5xx
Hardware-level failure
(System operations
will stop)
W031 Transmitted video data size [info]
Description
%1= host=, user=,
video=:
(W031)
%1
W: WebView session, V: Session-less video
client
Meaning
When a client disconnected, the total data
that was sent to the client displayed in
number of frames.
W040 Clearing to external memory [info]
Description
%1 the image storing - %2 (W040)
%1
Starting or stopping
%2
Reason for starting/stopping
Meaning
Started or stopped clearing stream
recording to external memory.
W101 Invalid user name [notice]
Description
user not found (W101)
Meaning
The camera was accessed by an
unauthorized user.
W102 Invalid password [notice]
Description
user password mismatch
(W102)
Meaning
The password is invalid
W111 Invalid host [notice]
Description
host access denied (W111)
Meaning
The camera was accessed from a host from
which access is prohibited.
W130 Buffer recovered [notice]
Description
stream buffer recovered (W130)
Meaning
Image buffer for stream recording has
recovered.
W210 Camera operation discarded [warning]
Description
camera operation discarded (W210)
Meaning
Camera operation requested was
discarded.
- Quick Links:
- Preparing the Camera for Use
Hide quick links:
Table of Contents
