Advanced; Icr And Ir - D-Link DCS-7000L User Manual

Section 4: Configuration

Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable (ICR)

filter can be disengaged for increased sensitivity in low light environments.

Automatic:

The Day/Night mode is set automatically. Generally, the camera

uses Day mode and switches to Night mode when needed.

Day Mode:

Day mode enables the IR Cut Filter.

Night Mode:

Night mode disables the IR Cut Filter.

Schedule Mode:

Set up the Day/Night mode using a schedule. The camera will

enter Day mode at the starting time and return to Night mode at

the ending time.

IR Light Control:

The camera can enable or disable the IR (infrared) light according

to your preferences. This setting provides additional controls

depending on your specific application.

Off:

The IR light will always be off.

On:

The IR light will always be on.

Sync:

The IR light will turn on when the ICR sensor is on.

Schedule:

The IR light will turn on or off according to the schedule that you

specify below.

D-Link DCS-7000L User Manual

53