Search Functions; Alarm Log Search - Sanyo DSR-5016 Series Quick Operation Manual

Hide thumbs Also See for DSR-5016 Series:

Instruction manual (20 pages)

Instruction manual (227 pages)

Quick manual (28 pages)

Table Of Contents

page of 20

/ 20
Contents
Table of Contents

Table of Contents

DSR-5016 series Quick Operation Guide

• Alarm log search

Use the following procedure to perform an alarm search or alarm

thumbnail search by defining the period (month, week, day or time)

of the alarm recorded video.

Press the

[SEARCH]

button while the digital video recorder is

recording or stopped.

Select

"ALARM LOG SEARCH".

The alarm log search will start

from the current month.

< ALARM LOG SEARCH > TERM : MONTH

DD-MM-YY

1 5 10 15 20 25 30

Time

axis

SEARCH:ALARM

Select the value for "TERM". (Month / Week / Day / Hour)

Select the date, time or minute.

Selected day (hour or minute) is indicated with a yellow frame.

Select

"ALARM"

or "THUMBNAIL".

Press the

ing. A blue mark is displayed at the top left of the screen,

and normally recorded parts are displayed in blue. (The

search for normal recording may take some time.)

Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring

clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.

To move to the preceding / following

month, press the

[ALARM]

buttons.

TERM

Turning the jog dial

will move the cursor.

[FUNC.]

button to search for normal record-