Maintenance; Oven Light Replacement - GE Self-Cleaning Gas Dual Fuel Ranges Owner's Manual

WARNING

CAUTION

NOTE: The glass cover should be removed only when

cold. Wearing latex gloves may offer a better grip.

the oven at the main fuse or circuit breaker panel. Let

the bulb cool completely before removing it. For your

safety do not touch a hot bulb with a damp cloth. If you

do the bulb may break.

To Remove:

tabs of the glass cover clear the grooves of the socket.

Remove the bulb.

To Replace:

the glass cover into the grooves of the socket. Turn the

Lift-Off Oven Door

To Remove the Door:

frame to the unlocked position.

4. Close door until the top of the door is approximately

arms are clear of the slots in the range frame.

To Replace the Door:

position, rest the notch on the underside of the left

hinge arm on the bottom edge of the left hinge slot.

The notch in the hinge arm must be fully seated into

the bottom of the slot. Repeat for the right side.

notches in the bottoms of the hinge arms have not

seated correctly in the bottom edge of the slot. Lift the

door off the range and repeat previous step.

4. Push the hinge locks toward the range cavity and

down to the locked position.

28

SHOCK OR BURN HAZARD:

power to the oven at the main fuse or circuit breaker panel. Failure to do so may result in

electric shock or burn.

BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot

glass with bare hands or a damp cloth can cause burns.

NOTE:

bulb is smaller than

household bulb.

power to the oven once

the new bulb is installed.

inside the oven,

clean the glass cover

frequently using a wet

cloth. This should be

done when the oven is

completely cool.

Pull hinge locks up to unlock

Hinge arm

Bottom

edge of

slot

Notch

Rest notch on bottom edge

of hinge slot

Socket

3

"

1 2

Max

length

Bulb

Tab

Glass cover

Removal position

Push hinge locks down to lock

49-85212-3