Disassembly And Assembly Instructions; Removal Of Rear Cover; Removal Of Hde-Board; Removal Of Hl-Board - Panasonic TH-65PF12EK Service Manual
High definition plasma display
Hide thumbs
Also See for TH-65PF12EK:
- Specifications (3 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
9 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
•
,
,
,
,
and
9.1.
Removal of Rear Cover
1. Remove screws (×22
the Rear Cover.
Note: when fixing the Rear Cover
• Screw on screws (*1, *2) firstly.
9.2.
Removal of HDE-Board
1. Remove 4 screws (A) and then remove the HDE Terminal
Block.
2. Remove 4 screws (B).
3. Remove 2 screws (C) and then remove HDE-Board.
marks indicate screw positions.
, ×4
, ×15
) and then remove
9.3.
Removal of HL-Board
1. Remove 4 screws (D) and then remove the HL Terminal
Block.
2. Remove 4 screws (E).
3. Remove 2 screws (F) and then remove HL-Board.
9.4.
Removal of Slot Block
1. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
2. Remove the flexible cables from the connectors (DS1,
DS3).
3. Remove 6 screws and then remove the Slot Block.
21
TH-65PF12EK
Table of Contents
