Recording Mode - Samsung SHR-2160 User Manual
Real time
Hide thumbs
Also See for SHR-2160:
- User manual (211 pages) ,
- Quick manual (2 pages) ,
- Specifications (1 page)
Table of Contents
SHR-2160/2162/2080/2082 USER'S MANUAL
Image output
You are not allowed to connect VGA OUT and Composite/S-Video OUT simultaneously.
In other words, the user must choose either VGA output or composite/S-video output.
Composite : Makes the output come out through the "Composite / S-Video OUT" port.
VGA : Makes the output come out through the "VGA Out" port.
When changing the output from Composite to VGA or from VGA to
Composite, the system reboots automatically.
Play channel location
Designates the one channel location to play in play 9 split mode.
Lower right-hand corner : Sets the location at the lower right-hand corner.
Center : Sets the location in the center.
Multi-channel change
You can set changes for a split screen.
You can set it to 3, 5, 10, 20, or 30 seconds.
Caution
Caution
[Video Out]
When setting the Composite Output, VGA output does not come out.
When setting the VGA Output, Composite Output does not come out.
If you press the No. 1 button for 5 seconds in the Live Mode with keeping the MODE button
pressed, the system will change from VGA to COMPOSITE or from COMPOSITE to VGA and
reboot.
[Video Output]
NTSC VGA output: 720x480 (60Hz)
PAL VGA output: 720x576 (50Hz)
[NTSC]
For NTSC, because VGA output is output at 720x480(60Hz), if you have a PC with a CRT
monitor you will have to adjust the image size; and a PC with an LCD monitor that doesn't
support 720x480 adjusts the image signal to 640x480. During this process, vertical line noise
can occur.
[PAL]
For PAL, because VGA output is output at 720x576 (50Hz), if you have a PC with a CRT
monitor, you will have to adjust the image size; and in the case of a PC with an LCD monitor
that doesn't support 720x576, there won't be any images on the upper and lower parts of the
screen. Especially in the case of LCD monitors that don't support 50Hz, because the images
won't come up, we ask that you pay careful attention when selecting an LCD monitor.
5-17
4
Recording Mode
Record Mode
Details for Record Mode Menu are as follows.
NTSC
If you press the front "REC" button, the mode value to be recorded will be set.
For the setup of Event Recording Mode value, refer to 5-20. Event Recording
Mode Setup Menu.
Mode
On : The current channel is recorded if the REC button is pressed.
Off : The current channel is not recorded even thought the REC button is pressed.
The default value is set to "On".
Quality
It sets the Quality.
Set to the one among Very high / High / Normal / Low.
Rate
It sets the Rate means the number of screen recorded every second.
If it is set to 15 ips(NTSC)/12.5 ips(PAL), the system records too many screens per second
and the playback continues intermittently since recording is more detailed.
This is appropriate for concentrated monitoring zone setup.
IIn case of NTSC, select one out of 30 ips / 15 ips / 10 ips / 7.5 ips / 5 ips / 3 ips / 1 ips. In
case of PAL, select one out of 25 ips / 12.5 ips / 8.33 ips / 6.25 ips / 5 ips / 2.5 ips / 1 ips.
The Recording Menu will be activated depending on Video On/Off in the Camera Setup
(Menu5-12). In the case of cif, the total recording ips is 120ips; and in the case of half d1,
it's 60ips. While ips functions, if it goes over the determined total, it automatically adjusts to
the total as it changes from the last channel at the lowest ips (0.9 ips).
Caution
Caution
When calculating the total of recording seconds, the total is based on the highest recording
second out of the recording mode's recording seconds or event recording mode's recording
seconds. If you cannot select when selecting the desired recording seconds, please confirm the
recording mode's and event recording mode's recording seconds.
Video size
The Video size is displayed at the bottom of left.
In the case of the 2080/2082, 8-channel information comes up.
PAL
5-18
Table of Contents
