Incoming call>, press [DISP] button for at least 1
second.
Set the remote controller mode switch to "AUD" mode
before starting operation.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Operation
1
[AUD] knob*
[AUD] knob
[DISP] button
[FM+] or [AM–] button
[4] or [¢] button
Displays of KCA-BT100 Instruction
Manual
"DISCONCT"
"CONNECT"
"PHN-DEL"
"P-STATUS"
"BT-CON Y"
"BT-CON N"
Function Glossary
• "AUTO1", "AUTO2", "MANUAL" (Tuning mode
select)
Select a tuning mode of the radio.
Tuning mode
Display
Auto seek
"AUTO1"
Preset station seek
"AUTO2"
Manual
"MANUAL" Normal manual tuning control.
• "AVIN" (Audio/ visual input)
When this is set to ON, AV input source can be
selected.
ON1: Allows AV input source to be selected. Use
this setting when the built-in AV IN terminal is
connected to the external equipment all the
time.
ON2: Activates the attenuator function when
turning on the power with AV input source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disable AV input source selection. Use this
setting when the built-in AV IN terminal is not
used.
• "CHANNEL", "PRESET" (Seek mode Setting)
Sets the seek mode of the satellite Radio.
CHANNEL: Normal manual seeking control.
PRESET: Search in order of the channels in the
Preset memory.
• DTA (Digital Time Alignment)
Make fine adjustment of the delay time of the
speaker output specified at
(page 28) to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
Actual displays on this unit
"HF D-CON"
"HF CON"
"DVC-DEL"
"D-STATUS"
"HF-CON Y"
"HF-CON N"
Operation
Automatic search for a station.
Search in order of the stations in the
Preset memory.
Next page 3
33
|
English