Table of Contents
General features
Adjustment of Equalizer type at PRO
Adjusting the effect of an Equalizer type selected
in 'Equalizer Control' when 'Equalizer mode' is
"PRO".
1
Refer to 'Equalizer Control' (page 11) to
select the Equalizer type.
2
Select the item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the item
Press the [4] or [¢] button.
Adjustment Item
Adjustment Item
Display
Display
Display
Bass Center Frequency
Bass Center Frequency
"BasF"
Bass level
"BasLV"
Bass Q Factor
"BasQ"
Bass Extend
"EXT"
Middle Center Frequency
Middle Center Frequency "MidF"
Middle level
"MidLV"
Middle Q Factor
"MidQ"
Treble Center Frequency
Treble Center Frequency
"TreF"
Treble level
"TreLV"
• According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor
Bass Center Frequency
Bass Center Frequency
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the Bass Extend is set to ON, low frequency
response is extended by 20%.
4
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
12
|
English
Memory preset of adjustment of
Equalizer type
The 'Adjustment of Equalizer type at PRO' can be
preset.
1
2
Recalling a setting value
1
Range
Range
60/70/80/100 or 150 Hz
–12 — +12
1.00/1.25/1.50/2.00
ON/OFF
2
0.5/1.0/1.5/2.0 kHz
–12 — +12
1.0/2.0
10.0/12.5/15.0/17.5 kHz
–12 — +12
Movie Select
Selecting the Movie display.
1
2
Refer to 'Adjustment of Equalizer type at
PRO' (page 12) to adjust the Equalizer type.
Preset the adjusted value
Press the [1] — [3] button for at least 1
second.
Enter the Equalizer Control mode
Press the [EQ] button.
"EQ PRO" is displayed.
• If "EQ EASY" is displayed, refer to 'Equalizer mode'
(page 24) to set the mode to "EQ PRO".
Recall the setting value
Press the [1] — [3] button.
Enter the Movie Select mode
Press the [MOVIE] button for at least 1
second.
"Movie" is displayed.
Select the Movie
Press the [MOVIE] button.
Each time the button is pressed, the Movie
switch as shown below:
Movie
Scan of Movie
Movie 1
Movie 2
Movie 3
Movie 4
Movie 5
Movie 6
Movie 7
Movie 8
OFF
Display
Display
Display
"MovieScn"
"Movie 1"
"Movie 2"
"Movie 3"
"Movie 4"
"Movie 5"
"Movie 6"
"Movie 7"
"Movie 8"
"MovieOff"
Hide quick links:
Chapters
Table of Contents
