Functions Of Other Buttons - Sony MDS-JE330 Service Manual

Function

p

)

0

PLAY MODE n LEVEL/DISPLAY/CHAR

PLAY MODE n PLAY MODE

LEVEL/DISPLAY/CHAR

§

REPEAT

(*)When displayed as "PLAY MODE

the first time, the fluorescent display tube displays "PROGRAM".

4-7. TEST MODE DISPLAYS

Each time the LEVEL/DISPLAY/CHAR button is pressed, the display changes in the following order.

1. Mode display

Displays "TEMP ADJUST", "CPLAYMODE", etc.

2. Error rate display

Displays the error rate in the following way.

C1 =

AD =

C1 = Indicates the C1 error.

AD = Indicates ADER.

3. Address display

The address is displayed as follows. (MO:recordable disc, CD:playback only disc)

If the LEVEL/DISPLAY/CHAR button is pressed after pressing the

PROGRAM button, the display switches from groove to pit or vice versa.

h =

s =

(MO pit and CD)

h =

a =

(MO groove)

h = Indicates the header address.

s = Indicates the SUBQ address.

a = Indicates the ADIP address.

Note: "–" is displayed when servo is not imposed.

4. Auto gain display (Not used in servicing)

The auto gain is displayed as follows.

AG =

/

[

]

5. Detrack check display (Not used in servicing)

The detrack is displayed as follows.

ADR =

6. IVR display (Not used in servicing)

The IVR is displayed as follows.

[

][

][

Sets continuous playback when pressed in the STOP state. When pressed during continuous

playback, the tracking servo turns ON/OFF.

Stops continuous playback and continuous recording.

The sled moves to the outer circumference only when this is pressed.

The sled moves to the inner circumference only when this is pressed.

(

)

Switches between the pit and groove modes when pressed.

*

(

)

Switches the spindle servo mode (CLV S ˜ CLV A).

*

Switches the displayed contents each time the button is pressed

Ejects the disc

Exits the test mode

PLAY MODE", it means to press the PLAY MODE button, and then press it again. When pressed

n

Contents

Detrack check display (Not used in servicing)

– 17 –

Mode display

Error rate display

Address display

Auto gain display (Not used in servicing)

IVR display (Not used in servicing)