Making A Conference Call; Call Waiting - Huawei B890 Getting Started Manual

You can conference a maximum of three people on the TELUS network. The first

call can be incoming or outgoing, but the second call must be initiated by you.

To make a conference call:



Step 1 During a call, ask the recipient to hold, then press the Flash/Talk key

(varies by telephone model).

Step 2 Dial the next number.

Step 3 When the call is answered, press the Flash/Talk key to connect both

calls.

Your conference call is set up.

To disconnect one of the participants: During the call, press the Flash/Talk key



(varies by telephone model).

The participant who was last to join the call is disconnected.

To end the conference call: Hang up or Press the End key to end the call.



Your conference call ends.

When another call comes in, Call Waiting alerts you with two fast beeps. You

either accept the second incoming call or let it to go straight to voice mail. Either

way, you never miss a call.

Call Waiting works with Call Display, so you can see who is calling before

deciding to interrupt your first call.

You can disable Call Waiting for those calls you don't want interrupted.

To activate Call Waiting:



Dial *43# and hang up after you hear a tone indicating Call Waiting has been

activated.

To Deactivate Call Waiting:



Dial #43# and hang up after you hear a tone indicating Call Waiting has been

deactivated.

To Accept a Call Waiting:



Press the Hang up/Hook down (varies by phone model) during the call.

To Alternate between Calls:



Press the Hang up/Hook down (varies by phone model) during the call.

12