Removing The Battery Pack; Suspending/Resuming Terminal - Honeywell Dolphin 60s Quick Start Manual

Mobile terminal

Hide thumbs Also See for Dolphin 60s:

Table of Contents

Removing the Battery Pack

Perform the following steps to remove the battery.

1. Slide the latch to unlock the battery door.

2. Open the battery door.

3. Remove the battery.

Charging the Dolphin 60s

Dolphin terminals ship with the battery significantly discharged of

power. Charge the battery pack with a Dolphin charging device for a

minimum of 6 hours before initial use.

To put the device into Suspend mode when the terminal is powered

on:

1. Press and release the Power key

for approximately 4-5

seconds.

To resume from the Suspend mode, press and release the Power

key