Quick Links
For printer EPSON C41/C46/C45/C44/C43/
Thank you for using the "INKSYSTEM" Continuous ink supply system. It is the
best device for an inkjet printer, and it will definitely decrease your printing costs.
Before using this system, please read this manual carefully. The pictures in this manual
may be different with the real ones. Here just for your reference.
Note: The pictures in this manual may be different with the real ones. Here just
for your reference.
I. Inspection & Unpacking
1. Accessories
1) Continuous ink supply system .................................................1
2) Air Filter ..........................................................................1
3) Sponge ............................................................................1
4) Injector ............................................................................1
5) Long needle .......................................................................1
6) Short needle ......................................................................1
8) Installation Manual ..............................................................1
9) Certificate on free installation..................................................1
INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C41/C46/C45/C44/C43/
Installation Manual on
Continuous ink supply system (CISS)
C42/C41/C40/C20/480/580
Pic. 1-1
C42/C41/C40/C20/480/580
Pic. 1-2
1
Related Manuals for INKSYSTEM Continuous ink supply system
Summary of Contents for INKSYSTEM Continuous ink supply system
- Page 1 For printer EPSON C41/C46/C45/C44/C43/ C42/C41/C40/C20/480/580 Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones.
- Page 2 Pic. 1-3 2. Inspection before installation A. Check whether all the accessories are present. B. Check whether the system is retrieved normally or too much air is remained in the connecting tubes (length over 20cm). II. Printer test 1. Check the printer status, and its mechanics for any damage. 2.
- Page 3 Place the system on the table, check to see if there is any ink in each of the air balance tube. If yes, you need to remove the ink in the balance tubes by the following steps: 1) Pull sealed plug out (3-1-1). 2) Use the injector to draw ink.
- Page 4 Pic. 3-3-1 Pic. 3-3-2 4. Change ink cartridges Open the original cartridges cover (3-4-1), take out ink cartridges, install system cartridges (3-4-2), then press the cartridge cover back (3-4-3). Pic. 3-4-1 Pic. 3-4-2 Pic. 3-4-3 4. Fix place meter Find right place on the right side of printer according to place-meter (3-5-1), tear sticker cover of (3-5-2), then stick place-meter on it (3-5-3).
- Page 5 fall down during movement, if fall down, then the holder will be blocked during printing. Generally, before shipment, we have adjusted the tube to the right size, please double check before printing. Pic. 3-7-1 Pic. 3-7-2 8. Adjust tube length If step 7 is ok, then there is no need to go through this step.
- Page 6 Pic. 4-1-2 Pic. 4-1-3 V. Removing used continuous ink supply system Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3).
- Page 7 IС chips that sideways. IX. Product Warranty INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
-
Page 8: Warranty Certificate
If the user has previously performed a repair or change in the internal parts of the device. The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard.