Memory Requirements; Ensuring Proper Environmental Conditions; Power And Air Conditioning Requirements - HP xw8400 Workstation Hardware Setup Manual
Hide thumbs
Also See for xw8400 Workstation:
- User manual (216 pages) ,
- Service and technical reference manual (210 pages) ,
- Technical reference manual (200 pages)
Table of Contents
To restore default factory BIOS settings:
Press F10 while booting the workstation to enter the system BIOS.
1.
From the File menu select Default setup | Restore Factory Settings as Default.
2.
Press F10 to accept the changes.
3.
Select Apply Defaults and Exit.
4.
This restores the original factory system defaults.
Memory Requirements
The HP xw8400 uses DDR2-667 ECC Fully Buffered DIMMs. The amount of memory required
for your Autodesk Effects or Editing system depends on the resolution of your projects, the type
of work you perform and, in some cases, the platform on which you are running the application.
Refer to the Software Installation Guide for your product to determine the memory
requirements for your Effects or Editing application.
Ensuring Proper Environmental Conditions
You should consider the following environmental guidelines for all hardware configuration:
•
Make sure the rack in which hardware components are installed is open or ventilated. Follow
the ventilation specifications that apply to your system.
•
Place all components in an air-conditioned environment. All hardware components generate
heat and must be kept cool. See
•
Keep all hardware components in a clean, dust-free location.
•
Minimize vibration and humidity.
•
Do not block the vents on the component housing.
•
Do not drape anything, such as a jacket or a blanket, over hardware components.
•
Minimize electromagnetic noise by separating digital data and power cables from analog
audio cables and running them in different cable ducts.
Power and Air Conditioning Requirements
The values for power consumption and heat output were recorded on an Autodesk certified
system with all of the required peripheral and certified components.
N
:
These values can fluctuate if uncertified hardware components or third party applications
OTE
are added to your system. The use of uncertified hardware components or third party applications
is not supported. Please consult the manufacturer's documentation for standardized minimum
and maximum values.
"Power and Air Conditioning Requirements"
Hardware Configuration Guidelines
on page 7.
7
Table of Contents
