Quick Links
AEQ PHOENIX AUDIOCODECS. APPLICATION NOTE 0-D
Connecting AEQ Phoenix Mobile units via Internet, complex-
Through LOCAL network(s), DHCP not used, manual NAT. Making use of AEQ
Proxy SIP. Adapted to Phoenix Mobile User Interface
The most convenient and reliable way to connect an IP codec to a remote one through
Internet is by means of a dedicated, exclusive Internet access (DSL, cable modem). In
this application note, a way to achieve the same result will be proposed when this is not
possible as Internet access is shared with other equipments connected within a
managed, LOCAL LAN and DHCP is not available or convenient. This application note
also describes the recommended procedure when AEQ SIP Proxy is used, where both
equipments involved in the communication are registered, easing the task of finding the
remote IP address when it is variable or unknown.
As we need to get access to Internet, a shared resource in this case, it is mandatory to
contact the network administrator in order to have the required resources enabled and
gather all the necessary information.
This document shows the specific steps to make this connection possible in the most
general way possible, although some verification procedures have been omitted in
order to ease the reading, and some particular situations may be easier to solve that
the presented one.
For a detailed explanation of every step, and for details on how to configure other
options that may be more convenient for other cases, the reading of the rest of
application notes, as well as User Manual's chapter 4, is recommended.
1. NETWORK ADMINISTRATION INVOLVEMENT
We will need that the Network Administrator...
1. Provides us with a valid internal IP within the local network, for example
172.26.5.59, for sending SIP signaling as well as audio using RTP protocol.
Both IP will be the same in both cases, and we will refer to it as LOCAL IP.
2. Indicates us the Network Mask, for example 255.255.0.0
3. Tell us the DNS server IP address, for example 172.26.1.1 or a valid external
DNS server for the country we are working at. If it is not provided, we will still be
able to operate provided that we know the IP address of the SIP Proxy
(although it is always recommended to specify it by its DNS name)
4. Provides the Gateway IP address, as an example 172.26.1.1
5. Indicates us the network Public IP address. In most cases, there will be a
single public IP for SIP signaling and RTP traffic. We will refer to it as PUBLIC
IP, for example, 212.170.180.170
APLICACIONES ELECTRONICAS QUASAR S.A.
TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:
scenario configuration
www.aeq.eu
1
Related Manuals for AEQ Phoenix Mobile
Summary of Contents for AEQ Phoenix Mobile
- Page 1 IP for SIP signaling and RTP traffic. We will refer to it as PUBLIC IP, for example, 212.170.180.170 APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
- Page 2 Channel key and channel will be shifted to PROGRAM. APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
- Page 3 Make sure that the STUN server is activated and with a valid address set, as explained afterwards. APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
- Page 4 Press “back” key in order to go to 3. SIP config 2. Proxy and check: 1 Activate ON 2 Address: sip.aeq.es. APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
- Page 5 We are going to go through the correct configuration of the system and prepare it to make a test call to a unit called [email protected] that AEQ maintains for our APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
- Page 6 If the key above HP1 is activated (illuminated) and the APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...
-
Page 7
TX PROG should become green lit and audio should be heard through the headphones. The three first screen lines should be: Connected
@sip.aeq.es APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:... - Page 8 Application Notes corresponding to other scenarios. If you still have doubts, please don’t hesitate to contact one of our assistance services: [email protected] [email protected] APLICACIONES ELECTRONICAS QUASAR S.A. www.aeq.eu TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:...