Compound Authentication Commands - D-Link xStack DGS-3400 Series Reference Manual
Xstack dgs-3400 series layer 2 managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Cli reference manual (540 pages) ,
- Cli manual (463 pages) ,
- Reference manual (449 pages)
Table of Contents
xStack
The Compound Authentication chapter describes the Common feature for access control functionalities and
specifications.
The Compound Authentication commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create authentication guest_vlan
delete authentication guest_vlan
config authentication guest_vlan
config authentication ports
show authentication guest_vlan
show authentication ports
enable authorization attributes
disable authorization attributes
show authorization
config authentication server failover
show authentication
Each command is listed, in detail, in the following sections.
create authentication guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
C
Parameters
[vlan | vlanid ]
[vlan | vlanid ]
[vlan | vlanid ] [add | delete ] ports [
|all ]
[ | all] {auth_mode [port_based | host_based { vlanid state
[enable | disable] }]| multi_authen_methods[none | any | dot1x_impb |
impb_jwac]} (1)
{}
[local | permit | block]
Used to assign a static VLAN to be guest VLAN.
create authentication guest_vlan [vlan | vlanid ]
The create guest_vlan command will assign a static VLAN to be guest VLAN.
The specific VLAN which assigned to guest VLAN must be existed.
The specific VLAN which assigned to guest VLAN can't be deleted.
For further description of this command please see description for config authentication
guest_vlan ports.
vlanid - Specify the guest VLAN by VLAN ID.
Only Administrator and Operator-level users can issue this command.
A
OMPOUND
UTHENTICATION
102
14
C
OMMANDS
- Quick Links:
- Using the Console Cli
Hide quick links:
Table of Contents
