Table of Contents
Do not connect the power cord until all other connections have been made.
3
Step
: Hook Up
If you need more detailed information, see page 5.
Illustrations of the input/output terminals below are
typical examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on
the rear vary among the components.
Turn the power off to all components before
connections.
FM antenna (supplied)
Extend it so that you can obtain
the best reception.
To a wall outlet
Plug the AC power cord only after all
connections are complete.
• Demonstration will start automatically. To
cancel it, see page 8.
To assemble the AM loop antenna
AM loop antenna (supplied)
Turn it until the best reception
is obtained.
4
Hide quick links:
Table of Contents
