Table of Contents
Only 72LW99**
1
Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
Gather and bind the cables with the cable
holder.
Power Cord Holder
2
Pull the cable management on the stand cover
and organize cables. Then, put it back.
Only 50/60PZ57 ** , 50/60PZ95 **
1
Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2
Gather and bind the cables with the Cable
Holder. Install the LAN cable as shown to
reduce the electromagnetic wave.
Cable Holder
Power Cord Holder
Cable Holder
ASSEMBLING AND PREPARING
CAUTION
Do not move the TV by holding the Cable
y
Holder & Power Cord Holder, as the Cable
holders may break, and injuries and damage
to the TV may occur.
Not using the Desk-Type Stand
Only 50/60PZ57 ** , 50/60PZ95 **
When installing the wall mounting bracket,
y
use the Protection cover. This will protect the
opening from accumulating dust and dirt.
1
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
2
Attach the protection tape as shown in the
figure below to keep the protection cover
secure while moving the TV set.
Protection tape
29
Protection cover
Hide quick links:
Table of Contents
