Table of Contents
Quick Links
Owner's / Operator's Manual
Please Read This Manual Carefully Before Opeating This Engine!
It Contains Important Safety & Operating Information.
CBM 6.5 H.P. - 196cc
Part #7613-0001
4 Stroke – Air Cooled
Electric Start / Rope Start
General Purpose Gasoline Engine
Carter Bros. Mfg. Co., Inc.
1871 U.S. Hwy. 231
Brundidge, Al. 36010
(800) 240-3501, Option #2
www.carterbro.com
2
Table of Contents
Summary of Contents for Carter CBM 6.5 H.P. - 196cc
- Page 1 Owner’s / Operator’s Manual Please Read This Manual Carefully Before Opeating This Engine! It Contains Important Safety & Operating Information. CBM 6.5 H.P. - 196cc Part #7613-0001 4 Stroke – Air Cooled Electric Start / Rope Start General Purpose Gasoline Engine Carter Bros.
-
Page 2: Application Range
GENERAL !*! WARNING!*! Thank you for purchasing a CBM (Carter Bros. Mfg. Co.) brand engine! Please carefully read this manual before operating this engine. It contains operating and safety instructions as well as necessary maintenance information. CBM brand general purpose gasoline engines are of the highest quality and have the advantages of easy starting, 1. -
Page 3: Safety Notes
the room must be free from inhibition. III. IDENTIFICATION For your and others safety, please pay attention to all safety 1. FUEL TANK labels: 2. HIGH TEMPERATURE DECAL 3. OIL DIPSTICK 4. CRANK SHAFT FAN OUT 5. MUFFLER engine exhaust system 6. -
Page 4: Specification
when engine is warm but, NOT hot. This will enable all of the oil to drain properly while preventing burns to your skin. V. SPECIFICATION Model ZS160F ZS168FA ZS168FB ZS173F ZS177F ZS182F ZS188F VI. SPECIFICATION 2 Description Bore x stroke 60×42 68×45 68×54... -
Page 5: Check Engine Oil Level
ENGINE HAS NO OIL – YOU MUST FILL 2 Stage Air Cleaner Element - Check to see if the paper air cleaner is clean and that the foam cleaner element is free from dust. First using oil BEFORE STARTING ENGINE! bath air cleaner, filling clean machine oil level (oil level marked on the outer case of oil bath air cleaner) should be flush with oil level of the air Check engine oil level:... - Page 6 required speed. Operator must be present until the starting Each gasoline engine has been tested and inspected in our process is completed. factory> Generally, the engine will run without any adjustment. 1 choke Adjust to gasoline engine as needed by following procedure 2 set choke to below: position...
-
Page 7: Troubleshooting
position where it can reach, tighten lock nut. VIII. TROUBLE SHOOTING d. Check if throttle support and valve move smoothly. Will not start or starting difficulty: e. Install the fuel tank. Cause Solution Phenome Spark plug No gasoline flowing after unscrewing Clean valve... -
Page 8: Maintenance
Trouble Shooting continued IX. MAINTENANCE Remove Compressing fine Daily maintenance: spark Cylinder fuel plug, dry Check the filter element of the air cleaner, remove the dirt much Having and foreign materials to keep the element clean. spark Fuel at the Check the fastening nuts for tightness. -
Page 9: Transportation And Storage
Every two (2) years, check the condition of the fuel line. If there is any ageing, hardening or cracks, it must be replaced. Tighten the replaced fuel line joints and check for leaks. Perform maintenance before stopping use for long period of time. - Page 10 11/08, and may be changed without notice Please fill out this form and fax or mail it back to: Carter Bros. Mfg. Co. – 1871 U.S. Hwy. 231 – Brundidge, Al. 36010 or subjecting Carter Bros. Mfg. Co., Inc. to any liability as we...