Related Manuals for Seville Classics ULTRASlimline 10111
Summary of Contents for Seville Classics ULTRASlimline 10111
- Page 1 ULTRASlimline SPEED Instruction Manual Model: 10111 (with remote-control) Voltage: 120V AC Frequency: 60 HZ Current: 0.6 A PLEASE READ AND SAVE THESE INSTRUCTIONS © 2010 Seville Classics Inc. (800)-323-5565 or (310)-533-3800 www.sevilleclassics.com...
- Page 2 Parts List Fan Assembly STEP 1 Turn the base upside down. Unscrew the 2 base SCREWS and base CLIPS from posts on the BASE-back . Firmly snap the BASE-front onto the BASE-back by aligning the four holes onto the four posts. Replace the SCREWS and CLIPS that the clips wraps over the BASE-back and tighten.
- Page 3 Fan Assembly Control Panel STEP 3 Pass the Power Cord through the center hole in the center of the BASE. Align the BASE front with the FAN front and insert the four posts on the FAN body into the four holes on the top of the BASE, it will only go one way. Place the 4 SCREWS into the holes through the bottom of the base and tighten securely.
- Page 4 Control Panel Control Panel (2) Low Natural Wind - The wind settings will repeat the following 80 second wind cycle with Low speed being the most common. Low Speed One cycle High Selection of Wind: Allows for three different wind modes: 1.
- Page 5 ULTRASlimline Remote Control for Tower Fan Note This equipment has been tested and found to comply with the limits for Clss B digital To use your remote, point the top end directly at the front of the device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation.
- Page 6 If it still does not fit, contact a qualified electrician. suggestions please contact us at: Do not attempt to defeat this safety feature. Seville Classics Inc. 6. A loose plug/outlet connection may cause overheating and distortion Tel: (800)-323-5565 or (310)-533-3800 of the plug.