Table of Contents
1.4
Equipment Physical Dimensions
Subassembly
Dimensions
Additional Space
Requirements
SIMATIC PCS 7 OSx 4.0.0 Hardware (PA RISC)
Table 1-3
lists external physical dimensions for individual OSx station
subassemblies. Allow sufficient space so that power and signal cables can be
attached to the rear of the system unit and monitor.
Table 1-3 PA RISC Physical Dimensions
Subassembly
System Unit (Model B132L+)
Monitor (21-in; includes base assembly)
Monitor (17-in; includes base assembly)
Operator Keyboard
Engineering Keyboard
Trackball
Trackball
Magneto-Optical Drive
Magneto-Optical Drive
When figuring the total space that is required for individual subassemblies,
consider the following.
The physical dimensions for individual subassemblies do not account
for cabling. Allow sufficient space so that power and signal cables can
be attached to the rear of the system unit and monitor.
The system unit has fans mounted inside the box to provide adequate
air circulation. Be sure to provide a minimum of two inches free air
space adjacent to all system unit fan openings.
There are several openings at the top and at the rear of the monitor
cabinet for cooling purposes. Plan for enough space around the monitor
cabinet (two inches minimum) to provide adequate cooling.
Height
Depth
17.75 in.
18.0 in.
45.08cm
45.72 cm
19.0 in.
21.0 in.
48.5 cm
53.8 cm
16.5 in.
16.5 in.
41.0 cm
42.0 cm
2.5 in.
10.25 in.
6.3 cm
26.0 cm
2.0 in.
8.0 in.
5.1 cm
20.3 cm
3.0 in.
3.0 in.
7.75 in.
7.75 in.
7.6 cm
7.6 cm
19.7 cm
19.7 cm
4.0 in.
4.0 in.
13.0 in.
13.0 in.
10.2 cm
10.2 cm
33.0 cm
33.0 cm
Hardware Overview
Width
4.5 in.
11.43 cm
19.6 in.
49.8 cm
16.11 in.
42.0 cm
17.12 in.
43.5 cm
18.5 in.
47.0 cm
4.38 in.
4.38 in.
11.1 cm
11.1 cm
6.5 in.
6.5 in.
16.5 cm
16.5 cm
1-9
Table of Contents
