Table of Contents
GETTING STARTED
14
EN
Power-Linked Operation
When the Power Switch is set to "A" or "M", you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
Language Settings
The language on the display can be changed.
(
pg. 24, 28, 29)
1
Set the Power Switch to "M" while pressing
down the Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Press MENU. The Menu Screen appears.
4
Press + or – to select
"n", and press MENU.
The CAMERA DISPLAY
Menu appears.
5
Press + or – to select
"LANGUAGE", and press
MENU.
6
Press + or – to select
the desired language, and
press MENU.
7
Press + or – to select
"BRETURN", and press
MENU twice. The Menu
Screen closes.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (
1
on the left column.
2
press MENU. The parameter for "Day" is
highlighted.
3
the day, and press MENU.
Repeat to input the month,
year, hour and minute.
4
"BRETURN", and press
MENU twice. The Menu
Screen closes.
pg. 18)
1
2
–
LC
D
T /
V
–
–
through the loop and grasp
–
LANGUAGE
–
AUX MIC
the grip.
3
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
LANGUAGE
–
sure to fasten the velcro strip to your preference.
ENGLISH
Date/Time Settings
pg. 24, 29)
Perform steps 1 – 4 in "Language Settings"
Press + or – to select "CLOCK ADJ.", and
Press + or – to input
Press + or – to select
Grip Adjustment
Adjust the velcro strip.
Pass your right hand
Adjust your thumb and
D
I
P
Y
C M
A
ERA
S
LA
CL C
O K
2
0.
2 1
. 0 5
AD .
J
7 1
: 3 0
Table of Contents
