Table of Contents
Installing the Projector
a
Press the [Lens Shift] button.
Using the remote control
b
Press the [
][
][ ][ ] buttons to adjust the position of the
projected image.
Using the remote control
c
Press the [Esc] button to finish the adjustment.
Using the control panel
Using the control panel
Adjusting the tilt of the projected image (for normal installment)
Extend and retract the front feet and rear feet to adjust the projector's
horizontal and vertical tilt. You can adjust within a range of ±3.5°.
A
Extend the front feet and rear feet.
B
Retract the front feet and rear feet.
Attention
The front feet and rear feet can be attached and removed. Note that the feet
will detach if they are extended more than 10 mm.
36
- Quick Links:
- Replacing the Lamp
Hide quick links:
Table of Contents
