Notes On Installing 5-Inch Internal Devices - Fujitsu PRIMERGY TX300 S4 User Manual
Hide thumbs
Also See for PRIMERGY TX300 S4:
- Options manual (137 pages) ,
- Operating manual (121 pages) ,
- System configuration and order-information manual (17 pages)
Table of Contents
6.7.2 Notes on Installing 5-inch Internal Devices
This section explains installable 5-inch internal devices, SCSI-ID and topology. Observe the statement
herein before device installation.
Installable 5-inch internal devices
The following types of 5-inch internal devices can be installed in this server. Depending on the type of
5-inch internal device, the bays where to install those devices differ. Up to two 5-inch internal devices
can be installed.
Unit type
DAT72 unit
Data cartridge
drive unit
LTO unit
LTO2 unit
LTO3 unit
LTO4 unit
HDD Unit
Notes on installing SCSI interface 5-inch internal device options
• When installing a SCSI interface 5-inch internal device option, SCSI card (PG-2281) is required to
be installed. Additionally, a separate cable (PG-CBLS025) must be prepared.
• When using the SCSI type, set SCSI-ID to "6". For how to set it, refer to the manual provided with
the option device.
Notes on installing Internal HDD Unit Bay Conversion kit
• Internal HDD Unit Bay Conversion kit is available for the SAS model with 2.5-inch hard disk unit
type only. The kit occupies two bays.
• When using Internal HDD Unit BAY Conversion kit, make sure to install the SAS array controller
card (PG-248B / PG-248C1) in PCI slot 2.
Notes on installing internal LTO4 unit
A SAS card (PG-224B) is required to be installed when using internal LTO4 unit. Additionally, a
separate cable (PG-CBLA003) must be prepared.
Notes on installing internal data cartridge drive unit
To install an OS with an internal data cartridge drive unit installed, check that no data cartridge is
inserted. If a data cartridge is inserted, remove it, and then start installing the OS.
table: Installable 5-inch internal devices
Product name
Tape Drv DAT72 36GB internal
Internal Data Cartridge Drive Unit
Tape Drv LTO Ultrium1 100GB
Tape Drv LTO2 Ultrium2 200GB
Tape Drv LTO3 Ultrium3/Ultrium2
400GB
Tape Drv LTO4 Ultrium4/Ultrium3/
Ultrium2 800GB
Internal HDD Unit Bay Conversion kit
PRIMERGY TX300 S4 User's Guide
Product
Cable
ID
(Separate)
PG-DT504
–
PG-RD102
–
PG-
PG-LT102
CBLS025
PG-
PG-LT201
CBLS025
PG-
PG-LT302
CBLS025
PG-
PG-LT401
CBLA003
PG-BC104
–
Bay 2, 3
Bay
Interface
Bay 2
USB
Bay 2
USB
Bay 3
SCSI
Bay 3
SCSI
Bay 3
SCSI
Bay 3
SAS
–
179
- Quick Links:
- Server (Front View)
Hide quick links:
Table of Contents
Troubleshooting
