Replacing The Processor Heat-Sink; Procedure; Post-Requisites - Dell Inspiron 23 Owner's Manual
Dell inspiron 23 all-in-one touch screen desktop
Hide thumbs
Also See for Inspiron 23:
- Service manual (106 pages) ,
- Manual (21 pages) ,
- Quick start manual (2 pages)
Table of Contents
Replacing the Processor Heat-
Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
NOTE: The original thermal grease can be reused, if the original
processor and heat sink are reinstalled together. If either the processor
or the heat sink is replaced, use the thermal pad provided in the kit to
ensure that thermal conductivity is achieved.
1
Align the captive screws on the heat sink with the screw holes on the
system board.
2
Tighten the captive screws that secure the processor heat-sink to the
system board.
3
Adhere the Mylar to the processor heat-sink and fan.
4
Replace the screw that secures the processor heat-sink to the display-
panel base.
Post-requisites
1
Replace the
VESA-mount
2
Replace the
system-board
3
Replace the
back
4
Replace the
stand
Computer. After working inside your
bracket.
shield.
cover.
assembly.
After Working Inside Your
79
Hide quick links:
Table of Contents
