Table of Contents
*
8.Main switch
Refer to "CHECKING THE SWITCH".
9.Pickup coil resistance
Disconnect the AC magneto coupler from
●
the wire harness.
Connect the pocket tester (Ω × 100) to the
●
pickup coil terminal.
Tester (+) lead → White/Red terminal 1
Tester (–) lead → White/Green terminal 2
Check the pickup coil for the specified
●
resistance.
Pickup coil resistance:
459 ~ 561 Ω at 20 °C (68 °F)
(White/Red – White/Green)
10.Charging/rotor rotation direction detec-
tion coil resistance
Disconnect the AC magneto coupler from
●
the wire harness.
Connect the pocket tester (Ω × 100) to the
●
charging/rotor rotation direction detection
coil terminal.
Tester (+) lead → Red terminal 1
Tester (–) lead → White/Blue terminal 2
Check the charging/rotor rotation direction
●
detection coil for the specified resistance.
Rotor rotation direction sensing
coil resistance:
0.063 ~ 0.077 Ω at 20 °C (68 °F)
(Red – White/Blue)
*
C0NTINUITY
CORRECT
MEETS
SPECIFICATION
MEETS
SPECIFICATION
9 - 13
IGNITION SYSTEM
INCORRECT
Replace the main switch.
OUT OF SPECIFICATION
Replace the pickup coil/stator assembly.
OUT OF SPECIFICATION
Replace the pickup coil/stator assembly.
–
+
ELEC
- Quick Links:
- Engine
Hide quick links:
Table of Contents
Troubleshooting
