Table of Contents
1-2-3. Connection Connectors/Cables
Connection made with the connector panels during instal-
lation or service, should be made with the connectors/
complete cable assemblies specified in the following list,
or equivalent parts.
Indication
Connection connector/cable
TEST OUT
1-569-370-12 Plug, BNC
PROMPTER OUT
SDI 1/2
(BNC)
AUDIO IN CH1/CH2
1-508-084-00 XLR, 3P Male or
MIC 1 IN
ITT Cannon XLR-3-12C equivalent
(3P FEMALE)
RET CONTROL
1-560-078-00 Plug, 6P Male or
(6P FEMALE)
HIROSE HR10-7PA-6P equivalent
DC OUT
1-566-425-11 Plug, 4P Male or
(4P FEMALE)
HIROSE HR10A-7P-4P equivalent
INTERCOM 1/2
1-508-370-11 XLR, 5P Male or
(5P FEMALE)
ITT Cannon XLR-5-12C equivalent
DC IN
1-508-362-00 XLR, 4P Female or
(4P MALE)
ITT Cannon XLR-4-11C equivalent, or
Cable assembly 1-551-577-00
(Supplied with AC-550/550CE)
CRANE
1-819-261-11 Connector,
(12P FEMALE)
Round Type 12P
. 1-766-848-11 Plug, 8P Male or
REMOTE
(8P FEMALE)
CCA-5 cable assembly
(CCA-5-10 (10 m) /CCA-5-3 (3 m))
(option)
. REMOTE cable 1-783-372-11
(supplied with RM-B150, 10 m)
TRACKER
1-506-522-12 Connector,
(10P FEMALE)
Round Type 10P
*1: Use of REMOTE cable enables to monitor video signals. (The pin 8 is
available for the video signal line.)
The down-converted SD signal is output.
*2: If using a cable of length different from a standard product, contact your
local Sony Sales Office/Service Center.
n
*3: The pin 8 of CCA-5 cable is GND (ground).
The pin 8 of REMOTE cable is not GND (ground).
1-10
*2 *3
*1 *2 *3
1-2-4. Note in Connecting CCU Connector
(HDC1000/1400/1500/1580)
It is recommendable to clean the optical contact portions
mentioned below before connecting this unit to the camera
control unit.
. CCU connector of this unit
. Camera connector of the camera control unit
. Optical/Electrical cable
For details on a cleaning method, refer to Section 1-8
"Cleaning of Connector/Cable".
HDC1000/V1(E)
Hide quick links:
Table of Contents
