Hard-Disk Drive Bracket; Figure 5-12. Hard-Disk Drive Bracket Removal - Dell OptiPlex Gn Service Manual
Mini tower computer
Hide thumbs
Also See for OptiPlex Gn:
- Service manual (137 pages) ,
- Troubleshooting manual (131 pages) ,
- Reference and installation manual (126 pages)
Table of Contents
Dell OptiPlex Gn and Gn+ Systems Service Manual
5-12
Hard-Disk Drive Bracket
lower-back tab
hooks (2)
alignment tab
Figure 5-12. Hard-Disk Drive Bracket Removal
To remove the hard-disk drive bracket, follow these steps:
1. Disconnect the DC power cable and the interface cable from the back of
each hard-disk drive installed in the hard-disk drive bracket.
2. Remove the screw that secures the hard-disk drive bracket to the front
of the chassis.
3. Grasp the handle on the front of the bracket, and rotate the front of the
bracket up until the hooks are free from the chassis.
4. Lift the hard-disk drive bracket out of the computer.
When you reinstall the hard-disk drive bracket, be sure that the opening in the
lower-back tab is over the alignment tab on the chassis before you rotate the
bracket down into position.
hard-disk drive
bracket
handle
screw
Hide quick links:
Table of Contents
