System Reset; System Startup From Omc; Minimal Pc Configuration; Overview - Alcatel-Lucent OmniPCX Office Installation Manual
Hide thumbs
Also See for OmniPCX Office:
- Installation manual (230 pages) ,
- Manual (62 pages) ,
- User manual (32 pages)
Table of Contents
6.1.1.14
SYSTEM RESET
This menu is used to confirm resetting the system.
After the reset, your system will operate with the new parameters entered.
6.2
System Startup from OMC
6.2.1
Overview
OMC is the PC application used to program the Alcatel-Lucent OmniPCX Office
Communication Server system via a local connection (V24 or LAN) or a remote connection
(the PC modem is connected to the Alcatel-Lucent OmniPCX Office Communication Server
integrated modem via the public network).
Three levels of programming are available using OMC:
-
Easy View is used for Wizard configurations, i.e. the essential parameters for starting the
system.
-
EasyPlus View is used for wizard-type configurations with the extensions offered by the
Advanced key. This key opens a window which is equivalent to Expert View.
-
Expert View gives you unrestricted access to all the configuration possibilities.
The Wizard provides easy-to-use system programming, guiding the user step-by-step.
6.2.2
Installation procedure
6.2.2.1
Minimal PC Configuration
-
Pentium 4 processor (or higher for windows XP).
-
RAM: 512 Mb
-
Windows 2003 (32 bits with SP1 or SP2), Windows 2003 R2 (32 bits with SP2), Windows
XP (32 bits with SP3 and framework.Net 2.0), Windows XP 64 bits or Windows Vista
(32/64 bits with SP1), Window 7 (32/64 bits), Windows server 2008, Windows server 2008
R2.
-
Hard disk: 300 MB (recommended for installation and operation)
-
Screen: 800 x 600 pixels
System reset; the display shows "System reset in progress"
6-9
Hide quick links:
Table of Contents
