Table of Contents
General information
Product
S26261-F2762-E524
S26261-F2762-E525
S26261-F2762-E526
Product
S26361-F2850-E3
S26361-F2233-E13
S26361-F2573-E3
S26361-F2849-E3
S26361-F2233-E3
S26361 -F2848-E3
S26361-F2233-E6
U41057-J16-Z146-1-76
Main memory
–
There are 8 slots divided into 4 banks with 2 memory
modules each.
–
These take 1 GB, 2GB or 4GB PC 2100 DDR-RAM mod-
ules.
–
The maximum main memory capacity is 16 GB!
–
Mixing of modules within one bank is not allowed.
–
Standard for TX600:
ECC with memory scrubbing and chipkill
Main memory 1 GB (2 modules), PC21000 registered
DDR RAM, occupies one bank, maximum 2/system
Main memory 2 GB (2 modules), PC21000 registered
DDR RAM, occupies one bank, maximum 2/system
Main memory 4 GB (2 modules), PC21000 registered
DDR RAM, occupies one bank, maximum 2/system
Accessible drives
–
The system unit has 2 x 5.25 inch slots (1.6 inch height)
and slots for mounting the following:
–
1.44 MB floppy disk drive 0.5" and
–
DVD-ROM drive 0.5" (IDE)
Tape drive SDLT 320, 160GB, 16 MB/s, LVD/U2W,
3.2 x 5.25", maximum 1/system
Tape drive DAT DDS4 Autoloader, 6x20 GB, 3 MB/s,
LVD/U2W, 3.2 x 5.25", maximum 1/system
Tape drive LTO Ultrium, 100 GB,7.5 MB/s, LVD/U2W,
1.6 x 5.25"maximum 2/system
Tape drive VXA 2, 80 GB, 6MB/s, LCD/U2W
1.6 x 5.25", maximum 2/system
Tape drive DAT DDS4, 20 GB, 3 MB/s, LVD/U2W
1.6 x 5.25", maximum 1/system
Tape drive DAT DDS5, 36GB, 3MB/s, U2W SCSI
1.6 x 5.25", maximum 1/system
Option: Hot-plug backup drive
An optional hot-plug backup drive can be configured:
–
occupies 2 x 1" HDD bays
–
requires a RAID controller
Tape drive DAT DDS4, hot-plug, 20 GB, 3 MB/s, LVD/U2W
1.6 x 3.5", maximum 1/system
October 2003
Product designations
02
TX600
–
15
–
Table of Contents
