Installation instructions Jetmaster Mark 2 Gas Coal / Pebble Jetmaster gas coal / pebble burners are fuel effect Location Requirements appliances intended for use in a fireplace suitable for the 1. The fireplace construction must be non-combustible burning of wood. It is recommended that the Jetmaster...
Installation instructions Jetmaster Mark 2 Gas Coal / Pebble Installation: Lighting Instructions Fitting the Gas Grate PILOT IGNITION 1. Check unit is suitable for intended gas supply. (FIGURE 1) (FIGURE 2) (FIGURE 3) 2. The position of the gas control and inlet is on the right hand side.
Page 4
Installation instructions Jetmaster Mark 2 Gas Coal / Pebble Laying the fire • Unpack the coals/pebbles contained in a clear • Lay the coals/pebbles so that some irregularity to plastic bag and lay a row of coals/pebbles on the the pile through which the flames may lick, is created.
Jetmaster firebox which has been designed to ensure a proper draw and to eliminate emission spillage. 2. Initially the Jetmaster coal / pebble fire may burn with a slightly blue flame.After approximately 20 minutes the fire will settle down and burn with a yellow flame.
Page 6
Notes For further information contact Jetmaster Australia 10 Martin Avenue, Arncliffe NSW 2205 T: 02 9597 7222 F: 02 9597 7622 E: [email protected] W: www.jetmaster.com.au...