Ping; Ping6; To Ping The Ip Address 10.48.74.121 Four Times - D-Link xStack DGS-3400 Cli Manual
Xstack dgs-3400 series layer 2+ gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3400:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- User manual (326 pages)
Table of Contents
xStack
D G S –3 4 26 :5 # s ho w a ut o c on f ig
C o m ma n d: s h o w a ut oc o n fi g
A u t oc o nf ig S ta t e: D i s ab l ed .
D G S –3 4 26 :5 #
ping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.48.74.121 four times:
D G S –3 4 26 :5 # p in g 1 0. 4 8 .7 4 .1 21 t im e s 4
C o m ma n d: p i n g 1 0. 48 . 7 4. 1 21
R e p ly fr om 1 0. 4 8. 74 . 1 21 , t im e < 10 m s
R e p ly fr om 1 0. 4 8. 74 . 1 21 , t im e < 10 m s
R e p ly fr om 1 0. 4 8. 74 . 1 21 , t im e < 10 m s
R e p ly fr om 1 0. 4 8. 74 . 1 21 , t im e < 10 m s
P i n g s ta ti s t ic s f or 1 0. 4 8. 74 . 1 21
P a c ke t s: S e n t = 4, R e c ei v ed = 4 , L o st = 0
D G S –3 4 26 :5 #
ping6
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to test the connectivity between network devices.
ping {times } {timeout }
This command sends Internet Control Message Protocol (ICMP) echo messages to a
remote IP address. The remote IP address will then "echo" or return the message. This is
used to confirm connectivity between the Switch and the remote device.
times – The number of individual ICMP echo messages to be sent. The
maximum value is 255.
timeout – Defines the time–out period while waiting for a response from the
remote device. A value of 1 to 99 seconds can be specified. The default is 1 second.
None.
Used to test the connectivity between IPv6 ready network devices.
ping6 {times | size } {timeout
– Specifies the IP address of the host.
10>}
This command sends Internet Control Message Protocol (ICMPv6) echo messages to a
remote IPv6 address. The remote IP address will then "echo" or return the message. This
is used to confirm connectivity between the Switch and the remote device.
times – The number of individual ICMP echo messages to be sent. The
maximum value is 255.
size – Use this parameter to set the datagram size of the packet, or in
essence, the number of bytes in each ping packet. Users may set a size between 1 and
6000 bytes with a default setting of 100 bytes.
timeout – Select a timeout period between 1 and 10 seconds for this Ping
message to reach its destination. If the packet fails to find the IPv6 address in this
specified time, the Ping packet will be dropped.
None.
65
Table of Contents
