System Overview; Functionality; Display On Central Unit - Bosch FPC-500-2 Operation Manual
Conventional fire panel
Hide thumbs
Also See for FPC-500-2:
- Installation manual (82 pages) ,
- Quick installation manual (172 pages)
Table of Contents
6
en | System Overview
3
System Overview
3.1
Functionality
The FPC-500 Fire Panel is the main component of your fire
detection system. As the central control unit, the FPC-500
manages all information received from the detectors.
Depending on the relevant programming, the FPC-500 Fire
Panel relays all alarms to the connected notification appliances
and outputs.
As the user, you can control the behavior of the entire system.
You can silence and reset triggered alarms, change alarm
triggering delays (day/night mode), test zones and much more.
However, the system can only be programmed by persons with
advanced user rights. Therefore, any faults etc. must be
reported to your on-site specialist.
3.2
Display on Central Unit
Your fire panel features a number of LEDs to indicate operating
states and faults.
Zone LED
Red
Constant
Red
Flashing, 0.5 Hz
Yellow
Flashing, 0.5 Hz
Yellow
Constant
Yellow
Flashing, 2 Hz
Notification appliance
fault/disabled – LED
Yellow
Constant
Yellow
Flashing, 2 Hz
F.01U.172.982 | 5.0 | 2012.04
Meaning
The relevant zone is in alarm state.
The zone has triggered a pre-alarm.
The zone has a fault.
The zone is deactivated.
The zone is in test mode.
Meaning
Notification appliances are disabled.
There is a fault in the notification appliance.
Operation Guide
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH
Table of Contents
