Fujitsu SPARC Enterprise M4000 Features Manual page 72
Dynamic reconfiguration (dr) user's guide
Hide thumbs
Also See for SPARC Enterprise M4000:
- Reference manual (444 pages) ,
- User manual (376 pages) ,
- Service manual (308 pages)
Table of Contents
TABLE 3-14
Option
-q
-y
-n
-f
-v
-h
-c disconnect
-c unassign
-c reserve
xsb
3-18
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • January 2012
Options of the deleteboard Command
Description
Specifies the suppression of output message display.
The -y or -n option determines how output messages are
automatically answered, whether or not the messages themselves are
suppressed (with the -q option) or displayed.
Specifies that a response of "yes" is made automatically to output
messages.
The -y or -n option determines how output messages are
automatically answered, whether or not the messages themselves are
suppressed (with the -q option) or displayed.
Specifies that a response of "no" is made automatically to output
messages.
The -y or -n option determines how output messages are
automatically answered, whether or not the messages themselves are
suppressed (with the-q option) or displayed.
Forcibly deletes a system board from the domain. This option for
normal DR operations must not be used.
Displays the progress of this DR command.
If the option is specified with the -q option, the -v option is ignored.
Displays the usage information.
Specifies that the command delete a system board from the domain
and set it in the status where it is assigned to the domain. This is a
default option.
Deletes the board and adds it to the system board pool.
The command unconfigures and disconnects the system board from
the domain. If the board is in the state where it is assigned to the
domain, the command unassigns the board from the domain and
puts it in the system board pool. Also, if the domain power is off, the
command similarly puts the board in the system board pool.
Reserves the deletion of a system board from a domain. The system
board is deleted from the domain and placed in the system board
pool when the domain power is turned off or the domain is rebooted.
If the board is in the state where it is assigned to the domain, the
command unassigns the board from the domain and places it in the
system board pool. Also, if the domain power is off, the command
similarly places the board in the system board pool.
Specifies the system board (XSB) number of the system board to be
deleted.
Specify xsb in the XX-Y format. (XX = 00 to 15, Y = 0 to 3). The value
depends on your server. To specify multiple system boards, several
XSB numbers can be specified by delimiting each with a space.
Table of Contents
