Table of Contents
TG6611_6621PD(e-hg).book Page 28 Monday, February 14, 2011 10:53 AM
Programming
displayed in standby mode. The default setting is
"NEM". If you select "IGEN" without entering any
handset name, "Kézibesz. 1" to "Kézibesz.
6" is displayed.
1
8(1)4
2
Enter the desired name (max. 10 characters;
42. oldal).
L If not required, go to step 3.
3
M
4
{r}: Select the desired setting. s M 2 times
5
{ic}
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want to
answer such as junk calls.
When a call is received, the unit does not ring while
the caller is being identified. If the phone number
matches an entry in the call barred list, the unit
sends out a busy tone to the caller, and then
disconnects the call.
Fontos:
L When the unit receives a call from a number that
is stored in the call barred list, the call is logged
in the caller list (31. oldal) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
barred list.
Fontos:
L You must store the phone number with an area
code in the call barred list.
■ From the caller list:
1
{<} (y)
2
{r}: Select the entry to be barred. s I
3
{r}: "Bejövő szám tiltása" s M
4
{r}: "IGEN" s M s {ic}
■ By entering phone numbers:
1
8(217 s m
2
Enter the phone number (24 digits max.).
s M
L To erase a digit, press ^.
3
{ic}
Viewing/editing/erasing bar call numbers
1
8(217
2
{r}: Select the desired entry.
L To exit, press {ic}.
28
3
To edit a number:
~ s Edit the phone number. s M s
{ic}
To erase a number:
W s {r}: "IGEN" s M s {ic}
Megjegyzés:
L When editing, press the desired dial key to add,
^ to erase.
Setting call restriction
You can restrict selected handsets from dialling
certain numbers. You can assign up to 6 phone
numbers to be restricted, and select which
handsets are to be restricted. Storing area codes
here prevents the restricted handsets from dialling
any phone number in that area code.
1
8(256
2
Enter the base unit PIN (default: "0000").
L If you forget your PIN, contact an
authorised service centre.
3
{r}: Select the handsets to be restricted. s
t
L All handsets registered to the base unit are
displayed.
L "Q" is displayed next to the selected
handset numbers.
L To cancel a selected handset, press t
again. "Q" disappears.
4
M
5
{r}: Select a memory location. s M
6
Enter the phone number or area code to be
restricted (8 digits max.). s M s {ic}
L To erase a restricted number, press ^.
Megjegyzés:
L You can also select a memory location in step 5
as follows:
Press 1 to 6. s M
Changing the base unit PIN (Personal
Identification Number)
Fontos:
L If you change the PIN, please make note of your
new PIN. The unit will not reveal the PIN to you.
If you forget your PIN, contact an authorised
service centre.
1
8(132
2
Enter the current 4-digit base unit PIN (default:
"0000").
3
Enter the new 4-digit base unit PIN. s M
s {ic}
Table of Contents
