Hatteland HD 12T21 MMD User Manual
  1. Manuals
  2. Brands
  3. Hatteland Manuals
  4. Monitor
  5. HD 24T21 MMD
  6. User manual

Hatteland HD 12T21 MMD User Manual

Series x maritime multi display
Hide thumbs
Table of Contents

Quick Links

U S E R M A N U A L
Series X - Maritime Multi Display (MMD) Models
HD 12T21 MMD-xxx-Fxxx - 12.1 inch Maritime Multi Display
HD 15T21 MMD-xxx-Fxxx - 15.0 inch Maritime Multi Display
HD 17T21 MMD-xxx-Fxxx - 17.0 inch Maritime Multi Display
HD 19T21 MMD-xxx-Fxxx - 19.0 inch Maritime Multi Display
HD 24T21 MMD-xxx-Fxxx - 24.0 inch Maritime Multi Display
HD 26T21 MMD-xxx-Fxxx - 25.54 inch Maritime Multi Display
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com
User Manual MMD Series X
Updated: 03 Jul 2013
Doc Id: INB100519-1 (Rev 7)
Created: 363
Approved: 6542
Table of Contents
loading

Related Manuals for Hatteland HD 12T21 MMD

Summary of Contents for Hatteland HD 12T21 MMD

  • Page 1 Updated: 03 Jul 2013 Doc Id: INB100519-1 (Rev 7) Created: 363 Approved: 6542 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com...
  • Page 2 Copyright © 2013 Hatteland Display AS Aamsosen, N-5578 Nedre Vats, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS.

  • Page 3: Table Of Contents

    Contents Contents ..................3 Contents of package ..................6 General .................... 7 About this manual ..................8 About Hatteland Display ................8 www.hatteland-display.com ................8 Contact Information ..................8 Maritime Multi Display (MMD) - Introduction ..........9 Product Labeling ..................10 Touch screen products ................14 Installation ..................17 General Installation Recommendations ...........18...
  • Page 4 Specifications - HD 26T21 MMD-xxx-FxxC (LED/CCFL version) ....78 w/Touch Screen .................... 78 Technical Drawings ..............79 Technical Drawings - HD 12T21 MMD-xxx-Fxxx ........80 Technical Drawings - HD 15T21 MMD-xxx-Fxxx ........81 Technical Drawings - HD 17T21 MMD-xxx-Fxxx ........82 Technical Drawings - HD 19T21 MMD-xxx-Fxxx ........83 Technical Drawings - HD 24T21 MMD-xxx-Fxxx ........84...
  • Page 5 Contents Technical Drawings - Accessories ..........87 Technical Drawings - HD CMB SX1-A1 ...........88 Console Mount Kit 12”,15”,17”,19” ..............88 Technical Drawings - HD CMB SX1-B1 ...........89 Console Mount Kit 24” .................. 89 Console Mounting 24” ................... 90 Flush Mounting 24” ..................91 Technical Drawings - HD VED SX1-A1 ............92 VESA Bracket 12”,15”,17”,19”,24”,26”...

  • Page 6: Contents Of Package

    Documentation and Driver DVD/CD containing the user manual, including the Touch Screen driver for units delivered with a factory mounted touch screen. For most recent drivers, please Menu browser visit “www.hatteland-display.com/archive” for Microsoft® Windows® In some cases (due to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit Operating Systems instead.

  • Page 7: General

    General...

  • Page 8: About This Manual

    About Hatteland Display Hatteland Display is the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime, naval and industrial markets.

  • Page 9: Maritime Multi Display (Mmd) - Introduction

    Maritime Multi Display (MMD) - Introduction As a leading manufacturer of display and computer hardware for the maritime segment, Hatteland Display continuously gauges and responds to market needs. Our commitment to develop specialized products for a multitude of onboard ship systems continues, and with that the introduction now of a brand new product range called, Series X.

  • Page 10: Product Labeling

    This section details the locations, content details and specifications for factory mounted labels for all currently available standard Hatteland Display Maritime Multi Display (MMD) models. This information will in most cases also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
  • Page 11 Screen, but they will be grouped together where possible. Label Positions Notes Applies for Product Range Warranty label covers screw. HD 12T21 MMD-xxx-Fxxx Labels placed on rear. Warranty label covers screw. HD 15T21 MMD-xxx-Fxxx Labels placed on rear. Warranty label covers screw.
  • Page 12 Product Labeling Warranty label covers screw. HD 19T21 MMD-xxx-Fxxx Labels placed on rear. Warranty label covers screw. HD 24T21 MMD-xxx-Fxxx Labels placed on rear. Warranty label covers screw. HD 26T21 MMD-xxx-Fxxx Labels placed on rear. IND100077-133...

  • Page 13: Warranty Label

    Manufactured Date yyyymmdd IND100780-3 - Rev 06 - 02 Mar 2012 This document explains the type number structure for the Hatteland Display Series X Maritime Multi Display product range. Input Voltages & Power Rating Barcode (TYP+SNO) - Example standard typenumber:...

  • Page 14: Touch Screen Products

    Optical Performance Stable Calibration Gloves Water Durability Price Multitouch Frameless Design Analog Resisitive Surface Capacitive Projected Capacitive* *Used for all Hatteland Display standard Series X Touch Screen products. Note: 26 inch and/or customized solutions may use "Analog" or "Surface" resistive/capactive technology instead, please review datasheet. Touchscreen IND100110-12...

  • Page 15: Touch Screen Drivers And Documentation

    “Multitouch”. You may choose to install 3rd party drivers for example during trouble-shooting situations or to review features of the 3rd party software. Hatteland Display suggests that you should use factory default Microsoft® Windows® 7 HID touch drivers in any case possible.
  • Page 16 This page left intentionally blank...

  • Page 17: Installation

    Installation...

  • Page 18: General Installation Recommendations

    General Installation Recommendations First Things First! ATTENTION! IND100148-5 - Rev 02 To prevent damage to chassis and glass, please review the illustrations below before handling units. WRONG CORRECT HANDLING ! HANDLING ! Do not stress the corners, nor place Place horizontally on a smooth and clean surface it on a coarse and/or dirty surface Do not stress the corners, nor place Place horizontally on a smooth and clean surface...

  • Page 19: Installation Limitations

    General Installation Recommendations 7. If the push buttons of the product are not illuminated, an external, dimmable illumination (IEC 60945 Ed. 4, 4.2.2.3, e.g. Goose neck light) is required for navigational use. The illumination shall be dazzle-free and adjustable to extinction.

  • Page 20: General Mounting Instructions

    9. The classification is only valid for approved mounting brackets provided by Hatteland Display. The unit shall be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of mounting might require test and re-classification.

  • Page 21: Ergonomics

    General Installation Recommendations Ergonomics 1. The front surface of the display glass has an anti-reflective (AR) coating which can be scratched and damaged with improper cleaning. It is recommended to use only 90+% pure Isopropyl alcohol (Isopropanol) and a soft fabric cloth for this first cleaning.

  • Page 22: Maximum Cable Length

    General Installation Recommendations Maximum Cable Length Any cable should generally be kept as short as possible to provide a high quality input/output. The maximum signal cable length will depend on the signal resolution and frequency, but also on the quality of the signal output from the computer/radar.

  • Page 23: Housing / Terminal Block Connector Overview

    PCB terminal socket connector or inside the unit (electronic components, boards etc.). The following table outlines the specifications for connecters commonly used by Hatteland Display: Illustration...
  • Page 24 General Installation Recommendations Configuring Housing / Terminal Block connectors Below is a brief illustration that might be useful during configuration and installation of such connectors. You will need suitable pre-configured cable(s) and tools to configure the connector(s) and cable(s) that are present in your installation environment.

  • Page 25: Panel / Console Mounting Key Hole Bracket Kit For 12",15",17",19

    Installation Procedures Panel / Console Mounting Key Hole Bracket Kit for 12”,15”,17”,19” You need: Allen Wrench tool (3mm), 4 pcs of HD CMB SX1-A1 kit (included in delivery). Procedure suitable for: Display and Panel Computers Series X range. Attention: A suitable pre-cut panel cutout should be made prior to mounting. Do not force the unit into the panel cutout as it might break the outer glass or scratch the chassis on the unit.

  • Page 26: Panel Cutout / Console Mounting Bracket Kit For 24",26

    Installation Procedures Panel Cutout / Console Mounting Bracket Kit for 24”,26” You need: Pozidriv tool, 1 pcs of HD CMB SX1-B1 kit (included in delivery). Procedure suitable for: Display and Panel Computers Series X range. 24 inch used as illustration below, but same procedure also valid for 26 inch models.

  • Page 27: Mounting Bracket, Table / Desktop / Ceiling - 12",15",17",19

    Display or Panel Computer units has. If unsure, please contact Hatteland Display for support in choosing the correct bracket version (BRD or TMB). Table last updated 24 June 2013. Throughout 2013/2014 the BRD versions will be phased out of production and only TMB versions will remain available for manufactured units.

  • Page 28: Single Key Hole Vs Double Key Hole

    Installation Procedures HD TMB-SX1-A1 HD 12T21 MMD-xxx-Fxxx “HW01”: HD 12T21 STD-xxx-Fxxx Sold since April 2012. HD 12T21 MMC-xxx-xxxx Fits Double Key Hole Chassis only. HD 15T21 MMD-xxx-Fxxx HD 15T21 STD-xxx-Fxxx EN60945 Tested. HD 15T21 MMC-xxx-xxxx HD TMB-SX1-B1 HD 17T21 MMD-xxx-Fxxx “HW01”:...

  • Page 29: Important To Know About Left And Right Brackets

    Installation Procedures Important to know about LEFT and RIGHT brackets Throughout the following installation procedure for both BRD and TMB brackets, it is important to understand the difference between LEFT and RIGHT brackets. The Display and Panel Computer chassis are not 100% square boxed, but are slightly designed with a minor narrow angled chassis towards the rear (FIG1) to allow easier “drop- in”...

  • Page 30: Installation Procedure - Brd Versions

    Attention: A suitable pre-drilled location and knowledge of measurements for both main unit and brackets/tilting functionality should be prepared and checked prior to mounting. Please disconnect ALL cables before proceeding. Please review User Manual or visit www.hatteland-display.com for Technical Drawings regarding measurements for both main unit and Mounting Brackets.
  • Page 31 Installation Procedures ▼ 5: Ensure that both Key Hole Plugs slide into the Key Holes and goes to the bottom position (FIG1 and FIG2). If they appear too tight, you may loose the Key Hole Plug screw a few turns and re-try (see previous step 2). FIG3 shows Key Hole Plug correctly into Key Hole and both brackets in place.

  • Page 32: Installation Procedure - Tmb Versions

    Attention: A suitable pre-drilled location and knowledge of measurements for both main unit and brackets/tilting functionality should be prepared and checked prior to mounting. Please disconnect ALL cables before proceeding. Please review User Manual or visit www.hatteland-display.com for Technical Drawings regarding measurements for both main unit and Mounting Brackets.
  • Page 33 LED symbols to show or not, since symbols will be seen upside down. Review http://www.hatteland-display.com/inb100018-4.php (“Glass Display Control™ (GDC) LED & Button operations” section). Swapped Position: User Controls readable, cables has to bend up or go straight down, Left and Right Bracket needs to be swapped, indicating Left Bracket on Right Side, and RIght Bracket on Left Side to ensure proper fitting and to avoid wrong footprint of the mounting holes of the bracket base (reference to “Important to know about LEFT and RIGHT brackets”).

  • Page 34: Mounting Bracket For Table / Desktop Installation - 24",26

    Attention: A suitable pre-drilled location and knowledge of measurements for both main unit and brackets/tilting functionality should be prepared and checked prior to mounting. Please disconnect ALL cables before proceeding. Please review User Manual or visit www.hatteland-display.com for Technical Drawings regarding measurements for both main unit and Mounting Brackets.

  • Page 35: Physical Connections

    Physical Connections Connection area of unit (illustration) 3 x BNC, Composite Video IN USB Touch 2 x DVI-D In RS-232 COM VGA/RGB Out Power Input AC RJ45 Network RS-422/RS-485 COM 2 x VGA/RGB In Potmeter Port Power Input DC Grounding Screw Note: 19 inch unit used as example above, please review specifications for your actual model.

  • Page 36: Ind100130

    Physical Connections DVI-D IN: Connect your DVI cable to any of the two DVI-D 18+1P, Single Link Connector (female). Secure your DVI cable to the hex spacers provided on the unit and make sure you do not bend any of the pins inside the connector. Connect the other end of the cable to the DVI connector on your equipment and secure it.

  • Page 37: Power Input

    Physical Connections POWER INPUT: The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input. Please check specifications for your unit. POWER INPUT: Connect your DC power cable to the 2-pin Terminal Block 5.08 connector. The internal DC power module supports 24VDC.
  • Page 38 This page left intentionally blank...

  • Page 39: Operation

    Operation...

  • Page 40: User Controls

    User Controls USER CONTROLS OVERVIEW The units are designed by using Glass Display Control™ (GDC) touch technology to allow interactivity adjusting brilliance (brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only visible (backlight illuminated) when suitable power is connected.
  • Page 41 Used to sense level of ambient light in the surrounding environment. The sensor data can be read by suitable software through the Hatteland Display SCOM functionality of the unit and thus can be used to control brightness remotely. Note: This sensor is not visible for the eye or has any illumination behind to indicate it’s position. Further, by touching or covering this area will naturally make the sensor data inaccurate.

  • Page 42: On Screen Display (Osd) Menu Introduction

    OSD Menu Overview On Screen Display (OSD) Menu Introduction The OSD menu consists of main menus and submenus which is very easy to navigate through. All functions are explained in-depth later in this user manual. You should prior to using the OSD menu and functions, be sure to familiarize yourself with how to physically access the menu, how to navigate up/down/left/right, how to modify values, exiting menus and more.

  • Page 43: Osd Simplified And Full Menu Modes (Examples)

    OSD Menu Overview OSD Simplified and Full Menu modes (examples) You may encounter two different menu size setups based on factory default or by customized preset configuration. The Simplified Menu mode offers easy and clear access to most commonly used functions. The Full Menu mode offers a more advanced menu with technical information and is suited for more technical minded users.

  • Page 44: Osd Menu Structure

    OSD Menu Overview OSD Menu Structure In this table all functions within menus and their submenus are shown. Functions that begins with an asterix (*) and in bold/red font color style indicates this function/menu is only available during “Full” menu mode or during Video CVBS fullscreen.

  • Page 45: Color Mode Settings

    OSD Menu Overview Color Mode Settings (page 49) Level 1 (Main Menu) Level 2 Level 3 Level 4 Level 5 Color Mode Settings > < Exit Color Temperature > 9300K, 8000K, 6500K > (Automatic Action) User > < Exit Red > (Slider Bar) Green >...

  • Page 46: Osd Settings

    OSD Menu Overview OSD Settings (page 52-55) Level 1 (Main Menu) Level 2 Level 3 Level 4 Level 5 OSD Settings > < Exit OSD Position > < Exit OSD H Position > (Slider Bar) OSD V Position > (Slider Bar) Language >...

  • Page 47: Management Settings

    OSD Menu Overview Management Settings (page 56-61) Level 1 (Main Menu) Level 2 Level 3 Level 4 Level 5 Management Settings > < Exit * Graphic Scaling > < Exit Graphic Scaling > Full Screen, Fill to Aspect Ratio, 1:1 Zoom >...

  • Page 48: On Screen Display (Osd) Menu Functions

    OSD Menu Functions On Screen Display (OSD) Menu Functions The following section covers all possible settings that the user can (in a certain mode) encounter or needs to adjust via easy understandable menus, text and navigation. For simpler reading the menu choice “Exit” has been left out of description in this chapter intentionally.

  • Page 49: Osd Menu Functions

    OSD Menu Functions Input Source Settings - Rename Source |---2--- By factory default, every signal source input are named based on it’s signal property as described in the previous functions, but with the rename source function you can rename these into more understandable descriptions like;...
  • Page 50 OSD Menu Functions Image Settings Lets you configure various visual preferences for any signal. The contents of these submenu are listed below. Image Settings - Auto Position |---2--- Will automatically fit the current displayed full screen signal and center it based on the active area of the TFT display.
  • Page 51 OSD Menu Functions Image Settings - Hue *Available in “Full Mode” only + Video Fullscreen |---2--- Allows to adjust/shift the main color properties of all Red, Green, Blue and Yellow (unique hues) values. This can be useful for certain Composite Video sources (no effect on DVI/VGA signals) whose output may have shifted or seems to be “out of phase”, where for instance blue seems more dominant than green, red and yellow-ish colors.
  • Page 52 OSD Menu Functions Image Settings - Display - Clock |--------3-------- Adjust the horizontal frequency (clock) of the analog signal to improve visibility of the entire image. When it is adjusted, you will notice that the image will appear to be stretched and might in some situations start to flicker/scroll, at which point you must reverse the last adjustment to stop it from flickering/scrolling anymore.
  • Page 53 OSD Menu Functions Image Settings - Video Setup *Available when Video Fullscreen only |---2--- Provides submenus where the following settings for Composite video signals are available: Image Settings - Video Setup - Main MADI mode |--------3-------- Motion Adaptive De-Interlacing. Motion adaptive de-interlacing is a pixel-based two-phase process.
  • Page 54 OSD Menu Functions Image Settings - Video Setup - Noise Reduction - MPEG NR Mode |-------------4------------- MPEG NR (the generic coding of moving pictures and associated audio information) can be set to either “ON” or “OFF”. This function will try to reduce noise as result from compressed/formatted MPEG video streams.
  • Page 55 OSD Menu Functions Color Mode Settings Lets you adjust the color temperature (Kelvin degrees) of the image. This applies to the Main Source signal. Window overlays (PIP/PBP) and the OSD Menu overlay will be unaffected. Lower values make the image appear warmer, while higher values will make it appear cooler.
  • Page 56 OSD Menu Functions Multi-PIP Settings Lets you adjust how the Picture-in-Picture (PIP) or Picture-by-Picture (PBP) display mode is set up. The default position of the rectangle is set to upper left corner of the Active Display area. Note that this requires a valid incoming signal to be present in either the VGA or CVBS inputs.
  • Page 57 OSD Menu Functions Multi-PIP Settings - PIP Position |--------3-------- When PIP Child mode is active, the size and position of the frame displaying the Secondary Source can be adjusted by means of submenus for size and position respectively below. Settings as follows: “PIP H-Position”...
  • Page 58 OSD Menu Functions OSD Settings Allows you to customize the visual appearance of the On Screen Display (OSD) menu, such as; position, transparency, time-out, assign hot keys, define access modes and save, load and recall favourite settings and more. The contents of these submenus are listed below. OSD Settings - OSD Position |---2---...
  • Page 59 OSD Menu Functions OSD Settings - Presets - Save |--------3-------- Allows to save current state of all function and values to user defined presets. The contents of the submenu is listed below. Settings as follows: “User 1” = Save all OSD settings to User 1 slot. “User 2”...
  • Page 60 OSD Menu Functions OSD Settings - OSD Mode |---2--- Configuring the OSD Mode to show as simplified/most common functions or advanced (full) setup. Settings as follows: “Simplified” = A few functions is not visible/available in this state. For most uses this is the preferred setting and are safe for the display functionality and continuous trusted operation on the unit.
  • Page 61 OSD Menu Functions OSD Settings - OSD Key Outdoor |---2--- To prevent accidental activation of Glass Display Control™ (GDC) touch functions, you can add an extra layer of security on how “sensitve” the touch detection operates. This applies for “MENU”, “(-) Brilliance (+)”...
  • Page 62 OSD Menu Functions Management Settings Allows you to adjust overall settings for interaction/communication for the unit, such as scaling, zoom, timing of signals, adjust voltages for LED (which illuminate the front glass symbols), sensitivity for the touch control, VGA filter and Serial/Ethernet communication and more. The contents of these submenus are listed below.
  • Page 63 OSD Menu Functions Management Settings - Graphic Scaling - Horizont Stretch |--------3-------- All stretching will performed from center of active display area and outwards in one direction. Settings as follows: “Horizont Stretch” = Zoom/stretch current full screen signal in Horizontal direction only (left and right).
  • Page 64 OSD Menu Functions Management Settings - Unknown Timing Search *Available in “Full Mode” only |---2--- Use this if you are unable to find or detect the incoming full screen signal automatically (applies for Analog VGA and CVBS video signals only. A PIP or PBP configured signal is not supported). It may be a customized signal regarding resolution and refresh frequency.
  • Page 65 “Reset Factory Default” (or “Load User Default”+Slot Number, if available and previously stored by using “Save User Default”+Slot Number) commands if you are unable to navigate the OSD menu. Please review the appropriate Technical User Manual located here: http://www.hatteland-display.com/pdflink/inb100018-4.php User Controls IND100064-38...
  • Page 66 OSD Menu Functions Management Settings - Filter *Available in “Full Mode” only |---2--- Filter (applies for VGA1 signal input only) is a Signal Noise Reduction technique to enhance a possible weak or bad RGB/VGA signal. It will remove certain types of noise patterns typically apparent in close proximity of other electronic equipment with less or lack of proper shielding to prevent interference.
  • Page 67 ● Note: Default mode is “RS232” protocol. A more detailed description of the SCOM (Serial/Ethernet Communication) can be found here: http://www.hatteland-display.com/pdflink/inb100018-4.php Review also the “Pinout Assignments” chapter in this manual for additional help during preperation and/or installation of external equipment intended to communicate with.
  • Page 68 OSD Menu Functions Service Will show various technical and unit related information, such as; Firmware versions, Elapsed Time, Internal Temperature, Fault Status and activation for the internal Test Pattern image useful for trouble- shooting. Some of these functions are static information while others are accessible. Whenever you are in contact with helpdesk or service personnel, they might require you to read back some of these values in order to precisely pinpoint any problem/question you should have with the unit or its functionality.
  • Page 69 OSD Menu Functions Service - Test Pattern |---2--- Will show the internal test pattern with greyscales, colors and raster patterned boxes to check for deviations in the TFT panel/display controller behaviour. It is independent of any current resolution or specifications found in the signal inputs. The test pattern is generated internally in the display controller and is sent 1:1 directly to the TFT panel.
  • Page 70 This page left intentionally blank...

  • Page 71: Specifications

    Specifications...

  • Page 72: Specifications - Hd 12T21 Mmd-Xxx-Fxxx

    • 115&230VAC - 50/60Hz : HD 12T21 MMD-Cxx-Fxxx model • HD VED SX1-A1 : 1 x VESA Bracket • 12-24 VDC (14VDC nominal) : HD 12T21 MMD-Fxx-Fxxx model Please see user manual/datasheet for more information Power Consumption: • Operating Standard...

  • Page 73: Specifications - Hd 15T21 Mmd-Xxx-Fxxx

    Specifications - HD 15T21 MMD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • High Quality TFT with LED Backlight •...

  • Page 74: Specifications - Hd 17T21 Mmd-Xxx-Fxxx

    Specifications - HD 17T21 MMD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • High Quality TFT with LED Backlight •...

  • Page 75: Specifications - Hd 19T21 Mmd-Xxx-Fxxx

    Specifications - HD 19T21 MMD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • High Quality TFT with LED Backlight •...

  • Page 76: Specifications - Hd 24T21 Mmd-Xxx-Fxxx

    Specifications - HD 24T21 MMD-xxx-Fxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: • High Quality TFT with LED Backlight •...

  • Page 77: Specifications - Hd 26T21 Mmd-Xxx-Fxxx (Led/Ccfl Version)

    Specifications - HD 26T21 MMD-xxx-Fxxx (LED/CCFL version) SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: •...

  • Page 78: Specifications - Hd 26T21 Mmd-Xxx-Fxxc (Led/Ccfl Version)

    Specifications - HD 26T21 MMD-xxx-FxxC (LED/CCFL version) SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! TFT Technology: Physical Considerations: •...

  • Page 79: Technical Drawings

    Technical Drawings...

  • Page 80: Technical Drawings - Hd 12T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 12T21 MMD-xxx-Fxxx TBD, DRAWINGS PENDING IND100132-218...

  • Page 81: Technical Drawings - Hd 15T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 15T21 MMD-xxx-Fxxx IND100132-219...

  • Page 82: Technical Drawings - Hd 17T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 17T21 MMD-xxx-Fxxx IND100132-220...

  • Page 83: Technical Drawings - Hd 19T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 19T21 MMD-xxx-Fxxx IND100132-221...

  • Page 84: Technical Drawings - Hd 24T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 24T21 MMD-xxx-Fxxx IND100132-222...

  • Page 85: Technical Drawings - Hd 26T21 Mmd-Xxx-Fxxx

    Technical Drawings - HD 26T21 MMD-xxx-Fxxx IND100132-236...

  • Page 86: Technical Drawings - Hd 26T21 Mmd-Xxx-Fxxc

    Technical Drawings - HD 26T21 MMD-xxx-FxxC w/Touch Screen IND100132-242...

  • Page 87: Technical Drawings - Accessories

    Technical Drawings - Accessories...

  • Page 88: Technical Drawings - Hd Cmb Sx1-A1

    Technical Drawings - HD CMB SX1-A1 Console Mount Kit 12”,15”,17”,19” IND100132-229...

  • Page 89: Technical Drawings - Hd Cmb Sx1-B1

    Technical Drawings - HD CMB SX1-B1 Console Mount Kit 24” IND100132-240...

  • Page 90: Console Mounting 24

    Technical Drawings - HD CMB SX1-B1 Console Mounting 24” IND100132-240...

  • Page 91: Flush Mounting 24

    Technical Drawings - HD CMB SX1-B1 Flush Mounting 24” IND100132-240...

  • Page 92: Technical Drawings - Hd Ved Sx1-A1

    Technical Drawings - HD VED SX1-A1 VESA Bracket 12”,15”,17”,19”,24”,26” IND100132-247...

  • Page 93: Appendixes

    Appendixes...

  • Page 94: Pinout Assignments

    Pinout Assignments ID’s (1,2,3,A,B,C) denotes where connector is (by factory default) or may be available (through factory customization). Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired connector.
  • Page 95 PIN 09 N/C No internal connection Analog RGB/VGA, 15-pin DSUB High Density Female *ECHO not supported. Half Duplex Configuration: Via Hatteland Display API. Flow control: Via RTS signal (controlled by user application). 5 4 3 2 1 10 9 8 7 6 COM Module RS-232 - 4 x ports, 9-pin DSUB Male Type Number “PCA100294-1”...
  • Page 96 Pinout Assignments 18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined Female Potmeter Control, 9-pin DSUB Male 1 2 3 4 5 6 7 8 C1 C2 4 3 2 1 9 10 11 12 13 14 15 16 9 8 7 6 PIN 01 +5V +5V out 17 18 19 20 21 22 23 24 C3 C4...
  • Page 97 Pinout Assignments 8-pin Digital Output / Input Module 10-pin Digital Output / Input & Serial Module 4+4 pin CAN I/O Module, 2 channels “Solid State Relay” “Mechanical Relay & COM (isolated RS-422/485)” Type Number “HT 00254 OPT-A1” CAN1 1 2 3 4 5 1 2 3 4 5 CAN2 COM (Common Center...
  • Page 98 Pinout Assignments Pin Assignments - 25-pin Female Parallel (Optional for selected computers) 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 STROBE This signal indicates to the printer that data at PD7..0 are valid.

  • Page 99: Basic Trouble-Shooting

    Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only meant as a general guide. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness is set/adjusted to max brightness.

  • Page 100: Declaration Of Conformity

    Declaration of Conformity We, manufacturer, Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC and HD MMC product ranges is in conformity with the following standards in accordance with the EMC Directive.

  • Page 101: Return Of Goods Information

    Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned.

  • Page 102: Terms

    Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included.
  • Page 103 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier. If goods are wanted to be returned, a Return No must be assigned from seller. Returned goods without a Return No will not be accepted.

  • Page 104: Pixel Defect Policy

    TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display. Hence Hatteland Display cannot be made responsible for such dot failures.

  • Page 105: Notes

    Note for units equipped with an PCTS (Projected Capacitive) Touch Screen: Reference to Engineering Change Notification June 2013: http://www.hatteland-display.com/mails/10_2013_ecn.html Touch Screen Firmware V1001 (12 inch) and V1000 (15,17,19,24): For Maritime Multi Display (MMD) / Industrial Standard Display (STD) units the touch screen signals are routed through the display unit via the USB port and can not be controlled / detect status by the unit itself in any way.
  • Page 106 User Notes Appendix IND100077-24...

  • Page 107: Revision History

    Added Installation procedures for HD TMB SX1-C1 and HD 19BRD SX1-A1, page 18,19,20 Added new functions: “OSD Lock mode/Full Mode” and “OSD Key Outdoor”, page 32,45,46,47 - Reference to ECN: http://www.hatteland-display.com/mails/01_2013_ecn.html Revised text for “OSD Mode/Full”, note #2, concerning power off and on, reverts back to Simplified, page 46 Revised text for “LED Drive”, default is 0-31, not 0-100, page 51...
  • Page 108 w ww .hat tel and-di s p l ay . com...

Table of Contents