Main Features; Symbols Used In This Manual - Sanyo DSR-5016 Instruction Manual
Digital video recorder with multiplexer function
Hide thumbs
Also See for DSR-5016:
- Instruction manual (20 pages) ,
- Quick manual (28 pages) ,
- Quick operation manual (20 pages)
Table of Contents
INTRODUCTION
Main features
The digital video recorder records video from
monitoring cameras to its internal hard disk,
and it can display real video being monitored
in four, six, nine or 16 screens. Recorded
video can also be played back with multiple
screens.
In addition to the two internal hard disks,
expansion units can be added for four hard
disks. The hard disks can also be used for
mirroring.
Complete range of recording and playback
functions
Simultaneous recording and playback of video at a
maximum 120 frames per second.
Timer recording allows recordings to be made at different
times each day.
Alarm recording allows the actions of intruders to be
recorded.
Zoom allows a certain section of monitored and playback
video to be magnified.
The video from specific cameras can be masked using a
black pattern to prevent it being monitored.
Motion sensing can be used with each camera. Alarms can
be set up to record moving images.
ROI allows recordings to be made with different picture
quality for each area on the screen.
Search function allows instant display of the
desired recording. ( P.35)
Alarm log search allows efficient searching of large
volumes of alarms.
Search in order of alarm occurrence.
Search by thumbnail using alarm search.
Search by date/time.
Search within the archive area.
Search for intruder motion using motion detection search.
Four-level user level function allows
restriction of users for data and equipment
management. ( P.110)
Complete with audiovisual connections.
Allows multi image output to monitor 2.
Features a dual-system audio input and single-system audio
output, and allows the switching of the output channel.
The front panel of the unit is equipped with VIDEO OUT
(same as MAIN MONITOR output terminal on the rear
panel) and AUDIO OUT terminals (same as the audio
output terminal on the rear panel) to easily connect to
commercially-available VCRs and DVD recorders.
The output image from the S-VIDEO terminal is the same
as the main monitor image.
Expandable and can be connected to a PC.
Recorded video can be copied to a CompactFlash card.
Connect a recommended recordable CD drive or DVD
drive to enable copying of recordings to a CD-R/RW or
DVD+R/+RW.
A built-in LAN terminal provides support for network
control, thus facilitating live monitoring, playback, searches
and menu settings.
Information on alarms and device malfunctions as well as
alarm images can be sent by e-mail.
Dome cameras can be controlled by button operations on
the digital video recorder.
Accessories
Check that you have all the parts shown below.
Power cord
Core clamp
1 large, 2 small
For: DVR power cord (large)
LAN cable (small)
RS-485 cable (small)
Power cord tie
Instruction Manual
(DVR/Network)
Quick Guide
CD-ROM Manual
Symbols used in this manual
Information describing operation methods or
how to get the most out of functions.
Information describing the correct use of the
digital video recorder.
( P.xx) indicates the page to be referred to.
Copyright
This manual and software are copyrighted by Sanyo
Electric Co., Ltd.
Brand and product names used in this manual are the
trademarks or registered trademarks of their respective
companies.
Except for personal use, copyright law prohibits the use of
recorded copyrighted images without the permission of the
copyright holder.
2
English
Table of Contents
