Table of Contents
Fresh Food Evaporator Cover
The fresh food evaporator cover is held to the back
wall of the refrigerator with fi ve 1/4-in. hex-head
screws.
To remove the fresh food evaporator cover:
1. Remove the 2 fruit and vegetable drawers,
climate control shelf, and deli pan that are in
front of the evaporator cover.
2. Remove the deli pan covers and deli pan slides.
(See
Deli Pan Assembly
3. Press down and remove the fan harness cover.
Press Here
4. Remove the fi ve 1/4-in. hex-head screws from
the top of the evaporator cover.
Evaporator Cover
5. Tilt the top of the evaporator cover out and
disconnect the deli pan fan and damper wire
harness. Remove the cover.
Fan and Damper Wire Harness
.)
Fan Harness Cover
Fresh Food Defrost Heater
The defrost heater is a single-tube, glass-enclosed
radiant heater. It is held in place by 2 tabs on the
evaporator (1 on each side) and by a ceramic and
wire support.
The defrost heater has an approximate resistance
value of 31 Ω.
To remove the defrost heater:
1. Remove the fresh food evaporator cover. (See
Fresh Food Evaporator Cover
•
During defrost, the drain probe assists in
preventing the drain from icing closed. During
assembly, the probe must be installed on the
evaporator and inserted in the drain to prevent
drain freeze-up.
•
A ceramic and wire support prevents the heater
from sagging and touching the metal drain
trough if the glass is broken.
2. Remove the ceramic and wire support, and the
drain probe from the evaporator.
Ceramic and Wire Support
3. Bend the aluminum tabs back (located at each
end of the defrost heater) and lower the heater
out of the evaporator.
4. Disconnect 2 lead wires and remove the heater.
– 51 –
.)
Note
Drain Probe
Defrost Heater
Heater Lead Wire
(1 of 2)
Hide quick links:
Table of Contents
