Data Sheet - Fujitsu Primergy TX300 S4 System Configuration And Order-Information Manual
Hide thumbs
Also See for Primergy TX300 S4:
- User manual (276 pages) ,
- Options manual (137 pages) ,
- Operating manual (121 pages)
Table of Contents
PRIMERGY TX300 S4
Data Sheet
Type
Model
Base Unit
Xeon® E5205(1.86GHz) (with TPM)
Xeon® E5205(1.86GHz) (without TPM)
CPU
Frequencies
Second-Level-Cache
Number of processors
Number of cores
Front-Side-Bus
Chipset
TPM (Trusted Platform Module)
Standard
Memory
Maximum *1
Graphics Controller
Resolution *2
Internal Bays
Number of bays
3.5 inch /
2.5 inch
HDD
Available HDD *3
(SAS/SATA)
Maximum *3
Internal Bays 5inch
DVD-ROM
PCI Slots
PCI Express (x4) [x8]
PCI-X (64bit/133MHz) [3.3V]
RAID
SAS / SATA Interface
FDD
Network Interface (onboard)
Interfaces
Server Management Software
Remote Service function
connector
Power supply
Voltage
Power consumption
Redundant power supply
Redundant Fan
Dimensions (mm)
Weight
Environmental Conditions
OS Support *4
Attached tool (Standard)
*1. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].
*2. Resolution is determined by functions of the display monitor and OS.
*3. HDD capacity is calculated according to the formulas 1GB=1000
*4. Drivers for Linux are not attached. Please download and use drivers of the following URL.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
*5. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5470(3.33GHz) (PGBFU40M) is available for upgrading to Intel® Xeon® X5470(3.33GHz).
*6. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5460(3.16GHz) (PGBFU40L) is available for upgrading to Intel® Xeon® X5460(3.16GHz).
*7. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon E5420(2.50GHz) (PGBFU40K) is available for upgrading to Intel® Xeon® E5420(2.50GHz).
*8. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon E5405(2GHz) (PGBFU40J) is available for upgrading to Intel® Xeon® E5405(2GHz).
*9. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5270(3.50GHz) (PGBFU40N) is available for upgrading to Intel® Xeon® X5270(3.50GHz).
*10. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5260(3.33GHz) (PGBFU40H) is available for upgrading to Intel® Xeon® X5260(3.33GHz).
TM
*11. TPM is available for BitLocker
Drive Encryption of Windows Server® 2008.
*12. This is the maximum memory capacity when Memory Expansion Board (PG-RB107) is applied.
*13. In case that SAS Controller installed as standard is used for RAID configuration, only 2 HDDs of same capacity and same rpm can be connected.
In case that SAS Controller installed as standard is used for SAS configuration, up to 4 HDDs can be connected.
*14. Only 4 ports are available.
*15. Only 6 ports are available.
*16. Regarding supported kernel versions of Linux, please refer to the following list.
http://www.fujitsu.com/downloads/PRMRGY/linux-os-kernel-compatibility-list.pdf
*17. Total number of cores of CPU(s) should be four or more for using VM (Virtual Machine) function.
*18. VM (Virtual Machine) function is not supported for 3.5inch SATA model.
*19. ServerStart doesn't support Linux.
*. 3.5inch SAS model : Noise level is 39dB. ( Noise level is 44dB when Power Supply Conversion kit (PGBRSU106) is applied. )
2.5inch SAS model : Noise level is 44dB.
3.5inch SATA model : Noise level is 39dB. ( Noise level is 44dB when Power Supply Conversion kit (PGBRSU106) is applied. )
3.5inch SAS model
PGUT3041A3
PGVT3041A
Intel® Xeon® X5470(3.33GHz) *5 / X5460(3.16GHz) *6 / E5420(2.50GHz) *7 / E5405(2GHz) *8 /
12MB ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) ) /
6MB ( Intel® Xeon® X5270(3.50GHz) / X5260(3.33GHz) / E5205(1.86GHz) )
4 per processor ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) ) /
2 per processor ( Intel® Xeon® X5270(3.50GHz) / X5260(3.33GHz) / E5205(1.86GHz) )
1333MHz ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) / X5270(3.50GHz) / X5260(3.33GHz) ) /
1GB (512MB ECC DDR2 SDRAM Fully Buffered DIMM x 2, PC2 5300F) (SDDC(Single Device Data Correction) supported)
32GB (2GB ECC DDR2 SDRAM Fully Buffered DIMM x
16, PC2 5300F) *12
6 (hot plug)
3.5inch, SAS, 15krpm, 73.4GB (PG-HDB75A)
3.5inch, SAS, 15krpm, 146.8GB (PG-HDB45A)
3.5inch, SAS, 15krpm, 300.0GB (PG-HDB35A)
3.5inch, SAS, 15krpm, 450.0GB (PG-HDB55A)
2.7TB ( 450.0GB x 6 ) *13
3 (2 free bays)
6 ( SAS Controller occupies one slot. )
standard
(SAS Controller, with RAID1 function) *13
SAS x 4ports
Display (Analog RGB), Serial Port x 2 (D-SUB 9pins), Parallel Port (optional, D-SUB 25pins)
AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 1
( AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 2
when Power Supply Conversion kit (PGBRSU106) is
applied. )
optional (hot plug when Power Supply
Conversion kit (PGBRSU106) is applied.)
optional (hot plug when Power Supply
Conversion kit (PGBRSU106) is applied.)
Rackmount ( when Rack Conversion kit (PG-R1CK24/PGBR1CK24) is applied.)
Windows Server® 2008 Standard (32-bit) / Windows Server® 2008 Enterprise (32-bit)
Windows Server® 2008 Standard (64-bit) / Windows Server® 2008 Enterprise (64-bit)
Windows Server® 2003 R2, Standard Edition (SP2) / Windows Server® 2003 R2, Enterprise Edition (SP2)
Windows Server® 2003, Standard Edition (SP2) / Windows Server® 2003, Enterprise Edition (SP2)
Windows Server® 2003 R2, Standard x64 Edition (SP2) / Windows Server® 2003 R2, Enterprise x64 Edition (SP2)
Windows Server® 2003, Standard x64 Edition (SP2) / Windows Server® 2003, Enterprise x64 Edition (SP2)
Red Hat Enterprise Linux ES (v.4 for x86) *16 / Red Hat Enterprise Linux AS (v.4 for x86) *16
Red Hat Enterprise Linux ES (v.4 for EM64T) *16 / Red Hat Enterprise Linux AS (v.4 for EM64T) *16
3
4
byte and 1TB=1000
byte.
Dual-Processor Tower Server
2.5inch SAS model
PGUT3041A4
PGVT3041A2
X5270(3.50GHz) *9 / X5260(3.33GHz) *10 / E5205(1.86GHz)
1 (max. 2)
1066MHz ( Intel® Xeon® E5205(1.86GHz) )
Intel® 5000P
standard (onboard) *11 (PGUT3041A3 / PGUT3041A4 / PGUT3041B3) /
- (PGVT3041A / PGVT3041A2 / PGVT3041B)
64GB (4GB ECC DDR2 SDRAM Fully Buffered DIMM x
16, PC2 5300F) *12
incl. Remote Management Controller, VRAM : 8MB
640x480/800x600/1024x768/1280x1024 dot
12 (hot plug)
( 20 (hot plug) by applying Internal
HDD Unit Bay Conversion kit (PG-BC104) )
2.5inch, SAS, 10krpm, 73.4GB (PG-HDD71B)
2.5inch, SAS, 10krpm, 146.8GB (PG-HDD41B)
2.5inch, SAS, 15krpm, 73.4GB (PG-HDD75B)
1761.6GB ( 146.8GB x 12 )
( 2936.0GB ( 146.8GB x 20 ) by applying
Internal HDD Unit Bay Conversion kit
(PG-BC104) )
3 (2 free bays)
( 3 (0 free bay) by applying Internal HDD Unit Bay
Conversion kit (PG-BC104) )
Max 8 DVD-ROM / Max 24 CD-ROM (SATA)
6 ( SAS RAID Controller occupies one slot. )
1
standard
(SAS RAID Ctrl (PG-248B),
with RAID0/1/1+0/5/6 function)
SAS x 8ports *14
3.5inch (1.44MB/720KB)
2 ports (1000BASE-T/100BASE-TX/10BASE-T)
Keyboard (PS/2type Mini DIN 6pins), Mouse (PS/2type Mini DIN 6pins)
USB x 5 (ver. 2.0) (Internal : x 2,External : x 3)
ServerView (Standard)
standard (onboard, Remote Management Controller)
1 port (100BASE-TX/10BASE-T)
AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 2
700W / 2520kJ/h (max.)
standard (hot plug)
standard (hot plug)
Tower : 174 (286 incl. protruding parts)(W) x 755 (D) x 473 (H)
: 483 (W) x 700 (750 incl. protruding parts) (D) x 177 (4U) (H)
Tower : 37kg (max.) / Rackmount: 34kg (39.1kg incl. rack rails) (max.)
Temperature10-35°C / Humidity 20-80% (non condensing ）
Red Hat Enterprise Linux 5 (for x86) *16 *17 *18
Red Hat Enterprise Linux 5 (for Intel64) *16 *17 *18
ServerStart (Setup Support tool) *19
3.5inch SATA model
PGUT3041B3
PGVT3041B
32GB (2GB ECC DDR2 SDRAM Fully Buffered
DIMM x 16, PC2 5300F) *12
6 (hot plug)
3.5inch, SATA, 7.2krpm, 80.0GB (PG-HDF87B)
3.5inch, SATA, 7.2krpm, 160.0GB (PG-HDF67B)
3.5inch, SATA, 7.2krpm, 500.0GB (PG-HDF57B)
3.0TB ( 500.0GB x 6 )
3 (2 free bays)
standard
(SAS RAID Ctrl (PG-248B),
with RAID0/1/1+0/5/6 function)
SATA x 8ports *15
AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 1
( AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 2
when Power Supply Conversion kit (PGBRSU106) is
applied. )
optional (hot plug when Power Supply
Conversion kit (PGBRSU106) is applied.)
optional (hot plug when Power Supply
Conversion kit (PGBRSU106) is applied.)
Table of Contents
