Canon PowerShot SD950 IS User Manual page 121
Hide thumbs
Also See for PowerShot SD950 IS:
- User manual (82 pages) ,
- Software manual (60 pages) ,
- Software user's manual (50 pages)
Table of Contents
Various Shooting Methods
1119
2
Press the
e
button.
• The camera will switch to color input
mode and the display will alternate
between the original image and the
color swap image (using the
previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor and
press the
+
button.
• Only one color can be specified.
• You can use the .. or .. button to specify the range of colors
that are swapped.
-5: Only takes the color that you want to swap
+5: Also takes colors close to the one that you want to swap
4
Aim the camera so that the desired color
appears at the center of the LCD monitor and
•
press the .. button.
• Only one color can be specified.
5
Press
e
to complete the setting, then shoot..
• The default setting for color swap mode changes green into white.
• You may not obtain the expected results if you use the flash.
• The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.
• The ISO speed may increase, or the noise in the image may
increase depending on the shooting conditions.
Hide quick links:
Chapters
Table of Contents
Troubleshooting
Related Manuals for Canon PowerShot SD950 IS
Related Products for Canon PowerShot SD950 IS
- Canon PowerShot SD900
- Canon PowerShot SD990 IS Digital ELPH
- Canon PowerShot SD960 IS Digital ELPH
- Canon Powershot SD940 IS
- Canon Powershot SD970 IS Digital Elph
- Canon Powershot SD980 IS Digital Elph
- Canon SD960IS - PowerShot IS Digital ELPH Camera
- Canon sd980kit1gold-BFLYK1 - PowerShot SD980 IS Digital Camera 12.1MP