Optical Drive Connector Cable - HP Pavilion 15 Maintenance And Service Manual
Pavilion 15 notebook pc
Hide thumbs
Also See for Pavilion 15:
- Maintenance and service manual (141 pages) ,
- Maintenance and service manual (91 pages) ,
- Maintenance and service manual (94 pages)
Table of Contents
Optical drive connector cable
Description
Optical drive connector cable
Before removing the optical drive connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Hard drive (see
c.
WLAN module (see
d.
Keyboard (see
e.
Top cover (see
f.
System board (see
Remove the optical drive connector cable:
1.
Release the optical drive connector cable from the clips (1) and routing channel built into the
base enclosure.
Battery on page
46), and then remove the following components:
Optical drive on page
Hard drive on page
49)
WLAN module on page
Keyboard on page
56)
Top cover on page
60)
System board on page
47)
51)
73)
Component replacement procedures
Spare part number
719846-001
95
Hide quick links:
Table of Contents
